Jump to content
SAU Community

Recommended Posts

and they lose power, i got 2 mates with the sam VR commonwhores, 1 on GAS, other on Petrol. You can tell easy that the petrol one pulls harder...

VL owners do it so that they do not spend more money than their car is worth on petrol...

Link to comment
https://www.sau.com.au/forums/topic/77873-straight-gas/#findComment-1423361
Share on other sites

it does have a higher octane rating, from memory its like 105. but the way gas is setup etc it prevents the engine from taking advantage of the 105 rating.

Well thats my point. The car is tuned to run gas and nothing alse so it gests the max out of the gas.

So i guess no one with a skyline has done it yet.

Link to comment
https://www.sau.com.au/forums/topic/77873-straight-gas/#findComment-1423895
Share on other sites

Guest DIRTgarage
Well thats my point. The car is tuned to run gas and nothing alse so it gests the max out of the gas.

So i guess no one with a skyline has done it yet.

The new gas injectors that have just been invented by an Aussie company will revolutionise the way we think of L.P.G.. The "gas injector" will fit into a standard fuel rail and totally do away with the power robbing gas mixers of the past. This will allow the full potential of the gas to be unlocked allowing gas to be used in high horsepower applications.

Dont believe it....here's a link!

http://www.abc.net.au/newinventors/txt/s1345083.htm

And here's another link with a dyno printout

http://www.gas-injection.com/news-lpg-gas-...gies.html#link1

Link to comment
https://www.sau.com.au/forums/topic/77873-straight-gas/#findComment-1423910
Share on other sites

Guest DIRTgarage
there is a bit of difference between the gas systems that  Always_me and spliff are talking about to the system that DIRTgarage is talking about..

have a read of the website its totaly different system

They are refering to the old school way...which has its limitations....the new way will certainly be a lot more effieient and power productive. I am in contact with the development team regarding a high performance application for a drag car...I will keep you informed.

Link to comment
https://www.sau.com.au/forums/topic/77873-straight-gas/#findComment-1426245
Share on other sites

Gas injection sounds like good stuff! That Bill cambell has a reason to be smiling id say. Only down sides from running gas i can see are very small like the loss of intake air cooling effect from injecting petrol and the loss of added upper cylinder and valve lubrication

Are there any others??

so what is wrong with the way gas is added currently? why isnt it as power effective as petrol?

maybe down the track when we are looking for those bigger injectors spend a little more and go the gas...

Link to comment
https://www.sau.com.au/forums/topic/77873-straight-gas/#findComment-1433482
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...