Jump to content
SAU Community

Recommended Posts

I'm gonna agree that police officers in Perth are fair. Anything I have been booked for has always been something I did wrong, I've even had my fair share of "we are just warning you today MR Hughes".

However 3 weeks ago when driving home one friday night a got pulled aside in an RBT and the cop went over the car with a fine tooth comb. He picked on my "too hard" suspension and even asked me what my alarm siren was? It was when I told him that it was an alarm siren that he let me go. Musta felt real silly. I was very nice to this guy but lost respect for him after that.

Drkside, quite possible thats why they sent him out there, to check any cars that look like they have been modified - sort of like a defect station (as they have over east). did you end up getting a defect for the suspension?

Speaking of suspension, I just re-checked mine today, as I fitted new coilovers recently and wanted to make sure the heights hadnt changed too much, or unevenly, which can happen when springs settle and sag after you first fit them..... 78mm off the ground, min legal in Aust is 100mm. So glad the guys didnt pull out a tape measure, but now my car looks like a 4WD (its back to 100mm)

  • 4 weeks later...
He told me to make sure I get permits when I transfer the rego, as its a $100 fine for any mod without a permit

Are you for real? $100 per mod without a permit? I think the cop had a hold of your nuts when he dropped that on ya, thats the first I have heard of such a thing as this....



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...