Jump to content
SAU Community

Recommended Posts

Hey guys,

***YOU CAN BUY ALL THESE PARTS IN ONE BIG CHEAP LOT***

Auto GTS Dash in great condition $offers

no longer showing any kays...

(could be used on a turbo car if you have your own boost gauge) (offers around $70)

A/C "radiator" (I think its called a condensor) (the thing that sits at the front) $150

A/C compressor, lines and all that stuff $150 (no gas of course)

If you want to full A/C system let me know, we will work something out.

Heater box (from behind the dash $50

Ashtry (with woodgrain for some reason) $15

Coil packs x 6. Checked them over and they look ok, no cracks or anything.. $140 the lot. Suit RB20DE, RB20DET, RB26DETT and S1 R33 GTS-T and RB25de of course.

Full R33 2 door dash with vents $130 (no cracks, looks fine)

Glovebox $20

Surround for cluster $15

Kick panels (both sides) no scuffs $20

Steering arms from both sides (woth stock suspension in good nik - no leaks) they are 4 stud though)

straight as (car wasn't damaged at front) Could be used to fix some damage if you got them re drilled for 5 studs with good rotors both sides $240 for both..

Steering Rack $100

ABS module $200

All plastics from around the front of a 33 (wheel arches and splash gaurd) $20

Brake lines (all of the metal ones) $20

Also have a VL N/A head, if anyone wants it $50, worked fine till it was pulled off (no noise or anything) car had 260000 kms.

I've got TONS of other bits, check back as I will update this. ask and I'll look, but its all the mechanical bits from the cut.

If anything here is stupidly overpriced tell me - we may be able to cut a deal... all prices are neg as I need to move this stuff out.

You could own ALL these parts for $320 plus pickup / postage. Make yourself some money and get the bits you need. I'm out of space and could use all this gone :(

Ask if you want something, I might have it. every single bit of the car has been taken out, cleaned and is ready for you!!!

Cheers!!!

Anthony

Link to comment
https://www.sau.com.au/forums/topic/78503-rb25-de-front-cut-leftovers-r33-bits/
Share on other sites

does the R33 DE wiring loom have the knock sensor provisions in it? i need a loom for my 25/30 using the same head you have just bought but will be running a powerFC and obviously would like the knock sensor provisions to be in there, otherwise i guess i could wire them in manually.....

Hey guys,

skyline

I can seperate the airbox if I can get a buyer for the AFM..

StockyMcStock

I'm sure they are in there.

d00dz

I have the piece also for the same price :P You mean under the steering wheel, covering the adjustment underneath right?

Bump for the day.

Lotsa stuff to go.

If anyone is interested in a lot of parts, pm me so I can give you a better price :P

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...