Jump to content
SAU Community

Toy Shop in Newcaslte broken in to so look out for cheap parts.


Recommended Posts

It is with great regret that we have to inform you that sometime during the early hours of Sunday morning, our premises were broken into and the following parts were stolen:

1 x Trust TD06 turbo kit with manifold and wastegate to suit Mazda 13B;

1 x Blitz Dual Blow Off Valves suit GTR

3 x sets of camshafts suit RB26DETT

1 x set of white 17" Enkei rims to suit GTR. Freshly painted.

Various HKS and Blitz gauges, white face, electrical and mechanical;

1 x OS Giken twin plate clutch suit R32 GTR

2 x Trust intercoolers, 300 x 600 x 76mm

1 x Trust intercooler, dual inlet, 300 x 600 x 110mm

Should you hear or see anything please contact Crime Stoppers (anonymously if need be) on 1800 333 000.

Please dont be tempted with anything that seems too cheap to buy as buying

from these low-lives you are encouraging their cretin-like behaviour... and it could be your shed or pride and joy that is the next to go.

Note that these parts have all been previously marked so should the perpretrators be caught with these parts they shall be easily identified....

Regards

Brad Host

Director

Dealer Principal

1/38A Enterprise Drive

BERESFIELD

NSW 2232

AUSTRALIA

LMD 17633

ph: (+61) 2 49662233

fax: (+61) 2 49662200

Website: www.japimports.com.au

email: [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...