Jump to content
SAU Community

Recommended Posts

Joel,

I'd rather have something that's quick 0-100km/h..... 100-200km/h.....& 200km/h-0 :P No good being quick to 100 but nothing left after that.

I had an interesting dream the other night...... I was side by side with a 280+rwkw Commodore doing 80-90, we both accelerated & I didn't see tail lights x2.

With very grippy tyres (i.e. RE540's - D01J's) 250+rwkw can be used to full effect on the street (once heated) although very grippy tyres can be a tad costly for daily use.

Back to the topic......

A STOCK GTS25t using ELF Turbomax (+ advanced timing) & running slicks would NOT get into the low 13's. Of course it depends on your definition of stock? I take stock as meaning factory standard, no modified parts AT ALL apart from the slicks. You can advance the timing as your not replacing anything but that's about it. High 13’s but not low!

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

Matt - That Commodore, Have you heard Jaffa is having some work done to the VX?

280rwkw would be needed to sit level with the 33. :P

----------

All depends on the Budget. :)

0-100 or should I say 0-160 is fairly decent with a 200rwkw R32.

That will do me. :D

Originally posted by kabab

As sub zero have claimed they ran a 12.8 with slicks advanced timing elf and exhuast.

So your telling me an exhaust will give you 1 full second in the 1/4 ??

If an exhaust system is restrictive enough a 1 second improvement is very possible. Ask any of the SA guys @ a recent Tilbrook dyno day. SPOOLIN's modified GTS25t made 219rwkw & then after replacement of the *very* restrictive cat & cat back section followed up with 282rwkw. A gain of 63rwkw is more than enough to reduce a 1/4 time by a full second.

Bottom line is...... until someone goes out & runs 13.3 or less (what I consider low 13's) in a factory standard GTS25t using only slicks, high octane fuel & advanced timing then I'm not convinced.

Maybe my last comment will gee someone up to prove me wrong :D If so good on 'em.

Originally posted by -Joel-

I can't believe a 12.8 from ~120rwkw in a 1400kg car.

Then again that bloke with the LJ type torana was making around 120rwkw and that weighs in at 1300kg's, He ran some where in the 12's with a really hard launch.

Joel,

The LJ only ran that quick as it was geared (diff & box) for 0-400m only! It was/is flat out doing much over 185km/h. Your car would manage a 12.8 if you set the gearing up to suit 0-400m, in fact seeing as you like 0-160km/h & off the lights stuff why don't you? :D

Yeah I knew Jaffa was having H/C done a while back. Jaffa's LS1 suffered from the dreaded oil consumption :D So why not go for it in the rebuild. The 280+rwkw Commodore I dreamt about has H/C too (+ a 300kw eng to start with) I also dreamt about another successful 80km/h run vs. a 240+rwkw Commie Ute.

260rwkw 1500kg (car with driver)

300rwkw 1700kg (ditto)

I would've thought the above would be closely matched. I could be way off though?

I remember reading somewhere a kg removed is worth more than a hp gained.

Originally posted by whatsisname

Bottom line is...... until someone goes out & runs 13.3 or less (what I consider low 13's) in a factory standard GTS25t using only slicks, high octane fuel & advanced timing then I'm not convinced.  

Maybe my last comment will gee someone up to prove me wrong :D  If so good on 'em.

I sure hope so to ken doll :D i to belive 13.3 or less is a low 13, subzero have there is hope..

Originally posted by -Joel-

ermmmmm H/C?

ahh Also Remember I do like those Rolling runs Matt. :)

LOL.. Do you tell your Wife about these dreams?

Or does she wake you up and tell you to stop throwing your legs and arms around from changing gears? :D

H/C = Heads & Cam package

:lol: She hears all about the dreams I have (not that she's all that interested) Naa she doesn't cop any stray feet or hands, the roll cage & harnesses keep the limbs on my side of the bed :D

:lol: They must've got their wires crossed dude. It should've been, "Fabio..... the most beautiful man in the world" :)

Who do you know in the RAAF that knows me?

Yer but look at the tyres. And ask what RPM he launched at.

I run those cheapo Simex tyres and they grip so damn wheel where I find it really hard to spin second up out of a corner and first gear doesn't spin on launches.

Bridgestone B530's, older style Donuts, Baraum & Goodyear F1's all would do the above & all with the same width 225 50' 16.

Ahh Rob (or Roo) I should've guessed! His RX7 is getting some serious HP these days! (big turbo & all) Xtra grunt so he can get himself in trouble with the law "again" :P

REV's 13.4 is an awesome time! I know REV had his new S-AFC II fitted, be interesting to know if he'd tweaked the mixtures @ all?

Goes to show just how tough it would be to crack a low 13 with nothing more than slicks, high octane juice & a bit of timing advance. The biggest restriction would be the factory exhaust system. I still think low 13's in a standard GTS25t (with blah blah...) is very unlikely, but maaaaaaaybe possible?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...