Jump to content
SAU Community

Bring back the 15 year old rule :( *** look at these bargains***

Cefiro_PWA
 Share

Recommended Posts

Baz Experienced

Baz

Posted
Posted

The R32 looks ok but the Pulsar IMO is pretty ugly. You have to remember that the only reason why the prices are now so low is that the high demand from australia has been lost and the cars have depreciated in value.

foznice Veteran

foznice

Posted
Posted

someone was saying here somewhere that if you can find a way to make the previous jap owners to sign some papers you can get import approval under the personal import scheme. Don't know if it would be very easy or not coming from a dealer, or if it would work at all but something to think about maybe?

Cefiro_PWA Rising Star

Cefiro_PWA

Posted
  • Author
Posted
someone was saying here somewhere that if you can find a way to make the previous jap owners to sign some papers you can get import approval under the personal import scheme.  Don't know if it would be very easy or not coming from a dealer, or if it would work at all but something to think about maybe?

i dont think you can even apply for an approval anymore, but getting a proof of purchese before the date is fine with these guys :chairshot

gtr660hp Experienced

gtr660hp

Posted
Posted

Yes its true if you can get original owner to sign permission forms for car to be imported to Aus you can apply for import approval,doesnt mean you will get it but. These cars arent particularly cheap anyway. I have seen both models go for less than 130000 yen at auction. I have imported many R32gtst some in amazing cond and paid no more than 200000 yen.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...