Jump to content
SAU Community

R33 Sedan - modified

4door_Sleeper
 Share

Recommended Posts

4door_Sleeper Veteran

4door_Sleeper

Posted
Posted

Colour/Year/Make/Model

- Silver 1993 ECR33 Nissan Skyline GTS25t Sedan

Engine Accessories

- Trust 3" Straight Through Cat Back Exhaust and Muffler

- FLYN 3" Straight Through Dump and Front Pipe

- K&N High Flow Pod Filter with Cold Air Partition

- Hybrid 600 x 300 x 70 Front Mount Intercooler and Piping

- Blitz DD BOV

- Nismo Adjustable Fuel Pressure Regulator

- NGK BCPR6ES (0.85mm gap)

- Nissan GTR Timing Belt

- Nissan N1 Water Pump

- Nissan Genuine Idler and Tensioner Pulleys

Engine Management

- Apexi SAFCII

- Apexi SITC

- Autospeed Norgren Boost Controller

Driveline

- 4 Speed Automatic

- LSD

- HICAS

Suspension

- Stock Shocks and Springs

- Custom Front Strut Brace

- Whiteline Adjustable Front Castor Bushes

- Whiteline Rear Subframe bushes

Brakes

- Recently machined front Rotors

- RB74 Front Pads

- DBA Kangaroo Paw Rear Rotors

- EBC Black Rear Pads

- Castrol GP 600 Racing Brake Fluid

- ABS

Bodywork

- SAU Stickers

- Rear Carbon GT Wing

- Factory Front Aero Bar Modifications

- Phillips Crystal Vision Headlights

- Metallic 25% Window Tint

Rolling Stock

- BBS 16" Rims

- Bridgestone SO3 tyres

Interior Gadgetry

- Apexi RSM /w G Sensor

- Splitfire Boost Gauge

- HKS Turbo Timer

- Reverse EL Dash

- Momo Steering Wheel with Nismo Horn Button

- Jays Leather Handbrake Boot

- Aftermarket Alarm, Keyless Entry, Genuine Nismo Key

Stereo Componentry

- Addzest CD/MD Head Deck

Price

- $14000 negotiable for quick sale...(recently purchased for $15,500)

-

Story

- Recently purchased this car from Adrien Strutton in QLD for my wife, but due to an unfortunate change in financial circumstances I have to sell it.

- Well maintained mechanically, it drives faultlessly.

- Well worth the price as it has most of the modifications you would want to do to a standard car already done to it. (and save yourself thousands)

No expense spared...

- Complied 10/2002...

- Never crashed...

- Never let us down...

-

Contact

- Guy

- 0413 648 750

- Email [email protected]

- or PM me

Link to comment
https://www.sau.com.au/forums/topic/79440-r33-sedan-modified/
Share on other sites
4door_Sleeper Veteran

4door_Sleeper

Posted
  • Author
Posted

Price is $14,000 ono

I purchased the car a few months ago for a little more than this. At that time I thought I had a bargain. I am not gready so I will pass the car on at a good price.

I have had a PM asking if there is anything wrong with the car (implication being that with these mods the price is too low) but I assure you the car is in good condition with no faults that I am aware of.

I believe this is an ideal opportunity to get into a great car at a good price. You can purchase a new (to Australia) import with fewer km, but it will cost you more, and by the time you factor in all the mods that have already been done to this car you are well ahead.

4door_Sleeper Veteran

4door_Sleeper

Posted
  • Author
Posted

Price is $14,000 ono

I purchased the car a few months ago for a little more than this. At that time I thought I had a bargain. I am not gready so I will pass the car on at a good price.

I have had a PM asking if there is anything wrong with the car (implication being that with these mods the price is too low) but I assure you the car is in good condition with no faults that I am aware of.

I believe this is an ideal opportunity to get into a great car at a good price. You can purchase a new (to Australia) import with fewer km, but it will cost you more, and by the time you factor in all the mods that have already been done to this car you are well ahead.

strutto Grand Master

strutto

Posted
Posted

Jeez I only just saw this otherwise I would have responded earlier... Tis a shame you can't keep it Guy :) Tis also a shame I can't buy it back :rant:

I'll confirm that this car IS a bargain at $14000... If anyone would like to know more about the car feel free to contact me and I'll help where I can...

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...