Jump to content
SAU Community

Recommended Posts

hey guyz

i have a r32 gts-t and i want to no if i have a 2 way or a locker

i assumed it was a locker until some 1 told me it might be a 2 way but ive never heard of a 2way whats the difference so i can tell

and also i have just put new wheels on 17" and im getting realy bad wheel hop in first but second if spinning perfect

any help grateful

cheers chris

Link to comment
https://www.sau.com.au/forums/topic/80082-2-way-or-locker/
Share on other sites

a 2 way would do it also but when i mean give theres like a small window ease on the diff that you can find before it locks in like finding the bite position of a clutch if u get me. so youd probs hear clunking when accel off where as a locker wont? anyone care to correct me??

Link to comment
https://www.sau.com.au/forums/topic/80082-2-way-or-locker/#findComment-1459306
Share on other sites

To test if you've got a 2 way or locker diff, find a low speed corner where your diff will skip/clunk when accelerating. Now go around the corner at the same speed but with your clutch in, if it doesn't skip or clunk, you have a 2 way/1.5 way or 1 way LSD.

Simple...

Link to comment
https://www.sau.com.au/forums/topic/80082-2-way-or-locker/#findComment-1459415
Share on other sites

To test if you've got a 2 way or locker diff, find a low speed corner where your diff will skip/clunk when accelerating. Now go around the corner at the same speed but with your clutch in, if it doesn't skip or clunk, you have a 2 way/1.5 way or 1 way LSD.

Simple...

Link to comment
https://www.sau.com.au/forums/topic/80082-2-way-or-locker/#findComment-1459437
Share on other sites

yes it does clunk  so i have a 2 way or 1.5 or 1 but sorry to stretch the freindship guys but is it possable to determine the difference between these 3

cheers

chris

A dodgy welded diff can clunk, so do the test I posted and you'll see if you have a mechanical LSD or a locked diff.

A 2 way diff will lock under acceleration AND deacceleration, a 1.5 way will lock under acceleration and be halfed locked under de-acceleration and a 1 way will only lock under acceleration.

2 way diff is good for drift as it will be still locked when you back off the throttle, therefore keeping the car sliding and not snapping back like a stock LSD will. It will increase understeer when cornering normally but I haven't noticed this really with my Kaaz 2 way LSD on my S13. It's fine for street driving and twisty roads if you're sensible and know how to drive.

1.5 way would be best for circuit racing and general street driving. 1 way LSD's aren't very common and I wouldn't bother with them other than for drag racing and it would probably be just cheaper and easier to use a mini spool if thats all you're gonna be doing...

Link to comment
https://www.sau.com.au/forums/topic/80082-2-way-or-locker/#findComment-1460644
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...