Jump to content
SAU Community

Recommended Posts

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

Mate chasing all the nuts and bolts for a RB26 Rebuild, somewhere after my motor was stripped down I lost the container that had every nut and bolt in it. Dont need any parts, just bolts and nuts.

email me at [email protected] if you can help me out

Thanks

  • 2 weeks later...
  • 2 weeks later...
hi mate will you take $100 FOR the standed inlet cam

If I separate the set I might not be able to sell the rest. At this point in time I am not willing to separate. Sorry gtr jason.

  • 1 month later...
  • 4 weeks later...
  • 3 weeks later...
whats included in the whole air con setup, very interested, it wont let me pm for some strange reason, shotgun the aircon setup!

novak

Hi Novak, I think it was a poor choice of words stating it was a full AC set up. Basically it's the stuff in the engine bay. I'll post up pic’s for you tomorrow and shoot you a PM.

hi

do you have pics of the 40L Fuel Cell (Aluminum System). intrested..

cheers

Sure, Ill have some pic’s up tomorrow.

interested in the stnadard GTR suspension... is it still available? please pm me asap

Still available and PM sent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...