Jump to content
SAU Community

PFC HELP reward offered possibly alcoholic (If that is your thing)


Recommended Posts

Hi all. I am trying to find out if the PFC is compatible with my A-LSD on my R33 GTS-T. I have searched the treads and come up with no conclusion, It works for some and not for others :confused:. So does any one with a PFC want to come to my place (or me to yours) and plug their PFC into my car and see if I get a LSD error or not, I really want to put this issue to bed! As stated earlier reward offered :uh-huh: Thanks guys!

my brother has the same problem. We tried on the weekend, series 1 r33 gtst with ALSD, plugged a brand new PFC in and the pfc wont communicate with an alsd, switches to fault mode and will only spin one wheel. Your best option would be to get an emanage, as its a piggy back system. any questions feel free to pm me.

Yeah this is my whole problem Many peoples dont work but Erins works fine :confused: So I want to see if I am one of the lucky ones or if I will have to go to the emanage/Profec e-01 combo

Andrew, it's ben covered recenly in NSW. Moanie and a few others tried it and it won't work.

Sorry for the bad news mate. I don't know how Erin got by though.

Yeah I was talking to moanie a bit the other day. I read that tread and the fault seemed to range from noting at all, to light on occasionally but diff working, to diff open wheeling :confused:. That is why I want to give it a go on mine and see what happens. I might be one of the lucky ones. I dont want to fork out the cash for one only to have to try and sell it the same day I get it as it doesnt work. I am seriously thinking about Emanage instead of experimenting just to save some stuffing around!

I've been advised not to remove the computer from my car anyway... for different reasons.

But I would say at this point in time, order it and take the car to Gav to have it fitted. Ultimately it's up to you, but if he can get mine and others working, I doubt he'd have an issue with yours :P

A-LSD is a Active limited slip differetial. It is computer controled as opposed to the normal methods. You will know if you have one cause when you start the car two orange lights will light up. One says A-LSD the other says slip.

Personally I'd turf out the old ALSD diff, and get a standard one put in. Plenty of people writing off their R33 lately, shouldn't be too hard to find for $500 or so, maybe less.

I know this seems a bit extreme, but I'd rather be spending a bit more and running full aftermarket management such as proven PowerFC, than just an e-manage. Depends what your goals are for the car.. just a bit more power, or ready for aftermarket turbo, etc later on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
×
×
  • Create New...