Jump to content
SAU Community

Recommended Posts

Hey guys,

im a regular on nissansilvia, but thought id jump across onto here to try sell this computer.

as stated, ive got a microtech ltx-12 for sale, including hand controller. been tuned for a 6cl rb20 from a 32.

looking for $850, pic below.

cheers

NOTE: serial cable not included as i never got it..but its just a regular serial cable u can get from dickies cheap as..

Link to comment
https://www.sau.com.au/forums/topic/82344-microtech-ltx-12-w-hand-controller/
Share on other sites

does it come with the loom? or is it plug and play for the 32 gtst?

nah sorry its just the computer and the hand controller. thats all i ever got so cant offer anything else.

as far as i know it is plug and play for 32's, but not positive as i havent had much experience with microtechs.

Will you accept $600 for just the LTX-12 and not the hand controller,

Im serious so can you pls let me know either way,

Cheers

thats a tad low, if i was gonan seperate id probably say 700 for comp and 100 for hand controller.

cheers

  • 3 weeks later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...