Jump to content
SAU Community

Recommended Posts

Hey guys

Just wondering if anyone has a full suspension kit from whiteline on there skyline ?

Im looking at getting the $2k 'works' package but I have no clue about anything suspension related realy. I believe you get everything you need with the kit but is it all worth it?, Would I be better off spending the 2k elsewhere ?? (besides the dictionary shop :huh: )

From what i've seen of whiteline there pretty good, but comments from anyone who's got the full kit would be gr8.

thanks

Link to comment
https://www.sau.com.au/forums/topic/82486-whiteline-kits/
Share on other sites

For Datsun 1600's the whitline kits are on the money! :(

However, I have not heard much about whiteline kits for skylines. So I'm neither going to bag it nor am I going to say it's good.

The jap brands out there are pretty damn good! I have seen HKS hypermax kits go for around $1500 on these forums. I think this is a pretty good buy for a set of suspension that is touted as being one of the best drag suspensions going around.

Maybe you should get a price on a good set of jap suspension eg. Tein, HKS, APEXI to name a few and then make your decision.

But make sure you do the research. Ask around, as there are a few cluey guys here that might be able to help you.

Link to comment
https://www.sau.com.au/forums/topic/82486-whiteline-kits/#findComment-1498456
Share on other sites

Hey guys

Just wondering if anyone has a full suspension kit from whiteline on there skyline ?

Im looking at getting the $2k 'works' package but I have no clue about anything suspension related realy. I believe you get everything you need with the kit but is it all worth it?, Would I be better off spending the 2k elsewhere ?? (besides the dictionary shop ;) )

From what i've seen of whiteline there pretty good, but comments from anyone who's got the full kit would be gr8.

thanks

Let's see, I have a full Whiteline kit on the Stagea, and one on the race R32GTST and one on the R34GTT. Plus we have one on the Prelude and the Integra. They are all great, everyone who rides in any of the cars comments on how well they handle and still ride nicely. That's on the road and on the track.

Maybe you should get a price on a good set of jap suspension eg. Tein, HKS, APEXI to name a few and then make your decision.

You can not compare a set of Jap brand name springs and shocks with a FULL suspension kit. None of those named above have stabiliser bars in the kit, or alignment bushes, camber/caster adjustment, subframe alignement bushes etc. The Japs try to do EVERYTHING with spring and shock rate, which is both simplistic and rather silly for Australian conditions.

Need more info? Do a search on Whiteline and Bilstein shocks (that's what shocks they use in the Skyline kits).

:(

PS; The search button is your best friend

Link to comment
https://www.sau.com.au/forums/topic/82486-whiteline-kits/#findComment-1498521
Share on other sites

well that confirms it then, whiteline kit it is!

thanks :)

One other quick question, i was reading in some other posts you get the 'low' or 'super low' springs or something with the kits ?

I called up some whiteline distributors they didnt know what I was on about. Is this the case ? Id be looking at getting the 'low' ones if it is, i just dont want to order the wrong thing.

Link to comment
https://www.sau.com.au/forums/topic/82486-whiteline-kits/#findComment-1504063
Share on other sites

  • 2 weeks later...

my mate just had the whiteline works pack installed in his 33 gtst... the ride is firm but does not 'crash' into potholes or jump and skip over rough surfaces...

and the cornering? my mate put it best when he said 'it will now corner much faster/better than I can drive'

so yeah just get the whiteline kit and be done with it... i am saving up!

Link to comment
https://www.sau.com.au/forums/topic/82486-whiteline-kits/#findComment-1537430
Share on other sites

  • 1 year later...

would the whiteline "works" package be suitable for drag? For GTT with appropiate settings and nitto drag extreme tyres. Will be running to4z with fully built engine and all the fruit to go...aiming for 450rwkw....is it possible to get any type of traction or just to much power?

Link to comment
https://www.sau.com.au/forums/topic/82486-whiteline-kits/#findComment-3295915
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...