Jump to content
SAU Community

Recommended Posts

They are awsome cars, but most people wont want to modify them because they will lose their New Car Warranty.

It would be tempting to lose the warrenty to see that huge power from a near stock car.

  • Replies 103
  • Created
  • Last Reply

Top Posters In This Topic

its getting very close to 3 years since ford released the BA falcon, so some early XR6T's will soon be out of warranty...

but that hasnt stopped any body, there are plenty of big HP XR's around, and plenty with just edits/basic mods

same with LS1 commodores... tho holden are a bit better than ford when it comes to warrantys & mods, so i hear

NinetySix,

There's no doubt the xr6 has awesome potential. And bang for buck when it comes to mods. Not including the initial purchase price.

No arguments there. :O

To get a GTST up around the 260-280rwkw mark you are looking at 1k for an ecu + 500 for tuning, 800 for injectors, 2k for a turbo, exhaust(bugger all) and fmic (bugger all).

Probably all up looking at 4.5k.

They are both awesome cars, one suits one person slightly better than the other.

For example myself.. Full time uni student.. Be buggered I could afford a XR6T. Little R32 with a nice turbo bolted on the side will do me.

Edited by Cubes

Cubes, I agree that an R33 is cheap to modify, but costs to modify an XR6 Turbo:

APS Stage II Kit: $5650

282 rwkw

12.8 second quater mile on street tyres (auto).

Motor Review: APS Stage II

APS Stage III Kit: $8750

345 rwkw

11.6 second quater mile on street tyres (auto).

10.9 second quater mile on slicks (auto).

Over 300km/h top speed

Motor Review: APS Stage III

So the XR6 can play the cheap upgrades game too! Pity it can't match the R33 for cheap purchase price! For the money I would prefer either 34 GT-T or 32 GTR. (Sorry, but 33's just don't do it for me...).

The real problem for us jap car lovers will be if the HSV crew decide to shoehorn the new Z06 'Vette engine into the Commodore. They did it with the C5 ZO6 and created the 300kw HSV GTS. The new C6 Z06 comes with 500hp and 500lb-ft stock. Revs to over 7000rpm from a 7 litre V8. I'm guessing mid 12's stock for that thing if it ever happens.

Oh, and as for the original questions, stock GTST vs stock XR6T will depend on the driver - the performance is too similar. Stock GTR vs stock F6 Typhoon I reckon the GTR would get the nod.

Some of you guys might not believe me but my stock RB20DET (stock turbo i think?) auto has kept up with a XR6T Auto to 100km/h when he backed off. Beat him by a bonnet length, his engine was basically beside my door so i could tell he was giving it plenty of stick. I have not lost one race yet having eaten v8s, new BMWs etc, WTF MY CAR'S STOCK :O .

Mine you over 400ms the XR6T should whoop mine but meh for what it is i'm happy.

Just tonight i beat a stock RX7 series 5 without much of a problem, at the next lights he asks me with a sour face, "what have you done to it?" ahahaha.....

Is my car just a freak?

Is my car just a freak?

A lot of standing start racing comes down to the driver. XR6 driver probably didnt stall up the engine before launching. My mate drives an N/A S13 Silvia with suspension, diff and clutch mods and he has chopped a few cars off the lights with brutal launches. He was feeling pretty invincible for a while having beaten a few V8s from the lights. Then came the race with the Audi RS6... that put him back in his place.

APS have a very good product, but they have nothing to do with "bang for buck" .... ie, they charge like a wounded bull.

you can get the same kinda performance as a stage2 kit with just injectors, valve springs and an edit, which can be had for $2500 without even doing any of the work yourself.

to go to stage 3 power levels the only difference is the intercooler, again 2k for that is a bit rich .... these days even $200 hybrid copys have been running 9 second passes in VL's... so one of them or something better still would have it up around 330rwkw or more, which is a high 11 on street tyres for not a lot more than $3000 to $4000max

Yeah true about the APS kits. They are meant for people who dont really want to research their upgrades, just wanna throw some money at a company to do it all for them. And APS get a lot of business.

And for Boostn6Potter beating an XR6 in his RB20, i cant believe that. He musnt of being going for it, unless you got it second hand, and the previous owner fiddled with the boost :P.

And as for the Typhoon vs the GTR, well its no contest. 4 wheel traction just obliterates whatever power advantage the Typhoon has.

All this talk makes me want to get a Skyline. I'd love an XR6, but finances sort of kills me. But once im rid of my VP, a new car it is.

Some of you guys might not believe me but my stock RB20DET (stock turbo i think?) auto has kept up with a XR6T Auto to 100km/h when he backed off. Beat him by a bonnet length, his engine was basically beside my door so i could tell he was giving it plenty of stick. I have not lost one race yet having eaten v8s, new BMWs etc, WTF MY CAR'S STOCK  :P .

Mine you over 400ms the XR6T should whoop mine but meh for what it is i'm happy.

Just tonight i beat a stock RX7 series 5 without much of a problem, at the next lights he asks me with a sour face, "what have you done to it?" ahahaha.....

Is my car just a freak?

I think you have been lucky so far. The time will come when you will meet someone worthy enough.

I have not been beaten by a skyline yet(on a private road of course) but doesn't mean there aint a heap out there that would have me for dinner.

In regards to the warranty issue, I think those guys who want the extra power will just go ahead with the edit. Most effective mod for those cars and if anything goes wrong they can always flash there cpu with the original program before handing it back to the dealer. That's what I have done with mine. Very cheap power and it seems to be enough for now. Maybe when warranty expires I'll add Cam/headers etc.

APS mods cost a bagful. One of the reasons why they charge a premium is because they have got engineering certificates for their mods.

Edited by Vuster

Heh yeah. What program does the LS2 use to change the ECU? You only going for NA power? the Twin Turbo kits for the LS2 are incredible for their worth.

I got to love the way people say that their car is a freak as an excuse of why they mysteriously beat other cars that they shouldnt. Bit like a guy from back in Ballarat who thought their NA VL automatic could beat my VP, both pretty much stock. (Mine had its head attacked with a dremel by myself. Man it chewed through bits, lucky it wasnt mine.)

Now for comparisons sake, a NA VL auto could barely take a tram.

Software is called VCM Suite which is pretty much the same as the EDIT but written by another company. I think putting a twin turbo kit on my car would be getting a bit ridiculous for suburban use.

Edited by Vuster

You guys reckon APS is expensive?

300km/h and 11 second passes on street tyres for less than $9k of mods, whilst still retaining a fat low down torque band, smooth idle etc. And it's fully engineered, emissions compliant, noise compliant, etc. Plus it's drive in drive out - no messing around yourself (although sometimes that is the fun bit).

Sure you can stick a T88 turbo on an RB, run a million pound boost and get more power for just as cheap, but it's less usable performance (due to lag etc) and reliability comes into question.

APS seems like pretty good value to me.

you get even better idle quality, drivability etc etc with the edit over a unichip. apparently APS are working on their own edit, dont know if thats ready or not yet tho. but unichips are no comparison to the edit

the 9k dosnt include the engineers cert tho, that costs extra but it is available AFAIK.

personally if (when :D ) i have an XR6 i would take it to HPF in dandenong

I was just reading through an issue of WHEELS mag from last year, they test drove the xr6t and the best time they managed to get after numerous goes was a 14.3 in the manuel. My r33 gtst is 100% stock and at calder park a few weeks ago i got a on my second go [email protected] and im not a profesional driver that I assume these guys would be. So to answer the question what would win xr6t vs r33gtst pretty much the same performance, but i doubt the xr6t in 10 years time will still be pulling the numbers a 10 year old skyline can. Go the Skyline!!

PS Fords are shit :P

PS Fords are shit :P

I'll assume you meant Fords are shit except for the Ford GT and Escort Cosworth.

4049634288.jpg

Ford Escort Cosworth = not shit

fordgt05.jpg

Ford GT = not shit

Regardless of if you like Falcons or not, you cannot possibly say either of those two cars are anything except awesome. Anyone disagree?

I still think the Torana is a pipe dream. Holden has done it before (Monaro 427....) And if it comes out looking like the retard Astra it was, I wont be happy.

The TT Alloytech was impressive however, but i just can't see a hero Holden without a thumping V8 in it. I know most of the Skyline community have some form of unnatural hatred for these engine configurations......but thats just because of all the VN V8 P Platers that think they are the fastest thing on 4 wheels.

Nothing better then winning a traffic light duel with a V8 and using 1/2 the fuel he did. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...