Jump to content
SAU Community

Recommended Posts

As above, cruise down the great ocean road 14th august.

All right heres the layout.

I'll have a few grouping points along the way so if your late you have time to catch up and for the people comming from differant locations can meet up.

1) Meet in Abbotsford 7:30 - 8:00. Ref 49E3. 126 Trenerry cres. olive green building last on your right befor corner if comming from Johnston st. opposite maugie st. front carpark. Depart at 8:00 am sharp. As in map 1.

1 B) Right into Johnston st,

Left into Hoddle,

Right into wellinton pde. Turns into Flinders st. Continue over Spencer,

turns into wurundjeri way. as in map 2.

Right on to the West gate fwy.

2) Gather point 1 at the BP service station in Lara.

Arrive 8:40am.Travel time from Abbotsford sholud be 35 - 40 mins. Leave at 8:50.

As you come down the freeway theres a sign that says "pt wilson restricted area" its a few k's past that sign. It's a k or 2 before the avalon airpot turn off.

As in map 3.

2 B) Along princess fwy into Geelong. Onto the surf coast hwy

as in map 4.

3) Gather point 2 at the Torquay golf club car park.

As you go through Torquay, past the surf shops (on right, eg. Ripcurl etc..) You come to the main round-a-bout. This is were the Surf coast hwy turns into the Great ocean rd. After going around to the right, take first left and thats the toquay golf club carpark. As in map 5.

By now every one who is on the cruise can get together have a chat and we can organise where we want to stop for lunch etc...

Head to Apollo bay!

I haven't been to Apollo bay in years so I don't know where a good spot to pull over is (as yet), so I guess the first big open space we see.

Map 6.

Take some photos, fark around a bit then come back up through the colac/princess hwy to Geelong then to Melbourne

As per usuall, start with a full tank of juice.

And if you are seriuosly interested in comming, don't have a big night on this piss saturday night. Sounds pretty self explanatory but I my self fell victim to it saturday just passed, was meant to go down with a few mates on sunday.

1 2 3

4 5 6

Attached thumbnail(s)

post-12730-1123035065.gif

post-12730-1123035095.gif

post-12730-1123035117.gif

post-12730-1123035141.gif

post-12730-1123035176.gif

post-12730-1123035198.gif

Link to comment
https://www.sau.com.au/forums/topic/82691-gor-cruise-14th-august/
Share on other sites

As above, cruise down the great ocean road 14th august.

All right heres the layout.

I'll have a few grouping points along the way so if your late you have time to catch up and for the people comming from differant locations can meet up.

1) Meet in Abbotsford 7:30 - 8:00. Ref 49E3. 126 Trenerry cres. olive green building last on your right befor corner if comming from Johnston st. opposite maugie st. front carpark. Depart at 8:00 am sharp. As in map 1.

1 B) Right into Johnston st,

Left into Hoddle,

Right into wellinton pde. Turns into Flinders st. Continue over Spencer,

turns into wurundjeri way. as in map 2.

Right on to the West gate fwy.

2) Gather point 1 at the BP service station in Lara.

Arrive 8:40am.Travel time from Abbotsford sholud be 35 - 40 mins. Leave at 8:50.

As you come down the freeway theres a sign that says "pt wilson restricted area" its a few k's past that sign. It's a k or 2 before the avalon airpot turn off.

As in map 3.

2 B) Along princess fwy into Geelong. Onto the surf coast hwy

as in map 4.

3) Gather point 2 at the Torquay golf club car park.

As you go through Torquay, past the surf shops (on right, eg. Ripcurl etc..) You come to the main round-a-bout. This is were the Surf coast hwy turns into the Great ocean rd. After going around to the right, take first left and thats the toquay golf club carpark.

As in map 5.

By now every one who is on the cruise can get together have a chat and we can organise where we want to stop for lunch etc...

Head to Apollo bay!

I haven't been to Apollo bay in years so I don't know where a good spot to pull over is (as yet), so I guess the first big open space we see.

Map 6.

Take some photos, fark around a bit then come back up through the colac/princess hwy to Geelong then to Melbourne

As per usuall, start with a full tank of juice.

And if you are seriuosly interested in comming, don't have a big night on this piss saturday night. Sounds pretty self explanatory but I my self fell victim to it saturday just passed, was meant to go down with a few mates on sunday.

1 2 3

4 5 6

Attached thumbnail(s)

is this an official cruise or invent your own?

hahah if we r heading down to apollo bay we can pretty much go to Adelaide :rolleyes: jk, how far is adelaide from apollo bay and wats left of the 12 apostles is at Apollo bay right?

gonna nead a crap load of fuel for this trip if ur coming from SE suburbs

yep, lets go to adelaide, what the f_ck we going to do there mate? lol

We can just go to lorne, I dont think it would be such a bad idea. We can see on the day.

The 12 apostles are actualy near port cambell. looking on a map I would guess that they are about 1 hour from apollo bay

hahah if we r heading down to apollo bay we can pretty much go to Adelaide :) jk, how far is adelaide from apollo bay and wats left of the 12 apostles is at Apollo bay right?

gonna nead a crap load of fuel for this trip if ur coming from SE suburbs

Someone doesn't drive much :lol:

Apollo Bay is only about 1/6th of the coastal route to Adelaide. You are much better off going through Ballarat, for the shortest drive to Adelaide, let us know when you get back :cheers:

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...