Jump to content
SAU Community

Recommended Posts

Item: 2000 N15 S2 Nissan Pulsar SSS Hatch

Item Condition: Interior immaculate. Exterior is in excellent condition.

Reason for selling: Reluctant sale; I'm buying a new car.

Price and price conditions: $15,250 ono, may trade.

Location: Hobart, Tasmania.

Extra Info:

- I am the 2nd owner.

- 5spd manual transmission.

- 68,XXX klms.

- Serviced every 5000klm since new with mobil1 synthetic oil (Full Service History).

- Moody Blue in colour.

- Reg is till April/2006.

- Bonnet and Headlight protectors.

This car has all standard SSS feature including:

- SR20DE (105kW) engine.

- Power mirrors, windows, steering

- Central locking

- CD Player

- 15" alloy wheels (new tyres!)

- SSS Bodykit

- SSS Floor mats

- Leather steering wheel and g/knob

- Air Conditioning

- ABS

This car has been fitted with the following:

- Whiteline Camber Pins (front).

- Whiteline rear adjustable swaybar.

- 4-2-1 stepping extractors.

- 2.25 inch exhaust system, with high flow resonator and straight-thru muffler with stainless steel tip.

- K&N panel-filter with a cold air feed from the front bar leading into standard airbox.

- 140W front speakers.

- DIN slot cup holders.

- Clear side repeaters (indicators)

- Nissan immobiliser and remote central locking.

Extras:

- Brand new Exedy heavy duty clutch (still in box).

I've never had any mechanical problems; it runs like a dream. It's a practical, reliable and cheap performance car.

You can contact me (Mike) on 0422 005 829 or PM me.

Pictures:

pulsar_001.JPG

pulsar_002.JPG

pulsar_003.JPG

pulsar_004.JPG

pulsar_005.JPG

DPP_0002i.jpg

DPP_0004i.jpg

DPP_0008i.jpg

DPP_0003i.jpg

Edited by Method
Link to comment
https://www.sau.com.au/forums/topic/83117-fs-2000-pulsar-sss/
Share on other sites

  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...