Jump to content
SAU Community

Recommended Posts

Hi all,

i know this is going to sound ridiculous but i dont know how to install momo pedals.. i took the factory rubber ones off my Series II (clutch and brake) but i dont know how to take the acceleration off without breaking it..

this definitely sux.. all i got was 3 momo pads and afew screws which dont even go anywhere.. i was thinking about drilling some holes into the pedals sop i can screw in the momo pads but i wasnt so sure so i decided to ask for help to do it the right way..

can anyone who knows how to take the factory acceleration pedal off help me.. and also can anyone who nkows how to install these pedals give me instructions...

thanks all,

regards,

-SHONG86-

Link to comment
https://www.sau.com.au/forums/topic/83977-pedals/
Share on other sites

Hi all,

i know this is going to sound ridiculous but i dont know how to install momo pedals.. i took the factory rubber ones off my Series II (clutch and brake) but i dont know how to take the acceleration off without breaking it..

this definitely sux.. all i got was 3 momo pads and afew screws which dont even go anywhere.. i was thinking about drilling some holes into the pedals sop i can screw in the momo pads but i wasnt so sure so i decided to ask for help to do it the right way..

can anyone who knows how to take the factory acceleration pedal off help me.. and also can anyone who nkows how to install these pedals give me instructions...

thanks all,

regards,

-SHONG86-

Stick your head behind the accelerator. There is a clip thingy that is clipped onto the metal rod. you have to unclip this using a flathead screwdriver. it's easy.

In regards to installing the pedals, momo have many different types. Use common sense. it's easy.

Link to comment
https://www.sau.com.au/forums/topic/83977-pedals/#findComment-1521015
Share on other sites

hey mate i have sparco peadals in my r32 and i took the break and clutch covers off like you but i found if i took the accel off it would just be the straight piece that holds it there so i just left the accel one on and screwed my sparco one onto it and you can only just see like a bees dick of it and for the clutch and brake i found the metal the holds the pedal there was in the way so i screwd thru the pedals its hard to do aswell i just used self taping screws then took them out and put the alan keys screws that came with the pedals in it looks hot.

good luck simon.

Link to comment
https://www.sau.com.au/forums/topic/83977-pedals/#findComment-1521795
Share on other sites

97r33gtst-typeM... done what you said it wa easy to take it off.. putting the momo acc pedal on was easy as well.. however the clutch and brae is farking me over.. there are no mounts for screwing the momo pedal into or onto the clutch and brake its jkust a piece of metal no holes nothing.. i was thinking about drillinmg holes into the clutch and brake but im not sure if i should do it and my common sense is running out fast.. the following layout of my pedal screw holes are as follows..

o 0 o

0

0

o 0 o

4 holes for 4 screws... clutch and brake have no holes just solid piece of metal.. what should i do guys.. help out a first timer here.. thinking about GT-TR34 idead but not keen i wanna know what else i can do before i start drilling..

thanking you all in advance,

regards,

-SHONG86-

* Thanks again 97r33gtst-typeM and Gtt R34

Link to comment
https://www.sau.com.au/forums/topic/83977-pedals/#findComment-1522201
Share on other sites

hey mate i drew on your pedal pic where i drilled the round ones are where i drilled thru but i found with the X ones the drill was too big to get in there so i just left them

on the legal factor i can see why the cops or anyone would really be looking at your pedals anyway and if they did its not like there guna say "ohh you've screwed through you pedals thats illagal"

also if the did you can just put the standard covers back on.

simon

post-16065-1124066559.jpg

Edited by gt-t_r34
Link to comment
https://www.sau.com.au/forums/topic/83977-pedals/#findComment-1522342
Share on other sites

these are my pedal 115 from myc there sparco strips nice pedals

they have a second plate underneath that is suposed to got at the back of the pedal and the front just screws on but the susposed to be biger thasn you standard pedals so thats why i cant do that and thus meaning i had to screw thru the pedals

post-16065-1124102004.jpg

Link to comment
https://www.sau.com.au/forums/topic/83977-pedals/#findComment-1523664
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...