Jump to content
SAU Community

Recommended Posts

Well, I wasn't expecting to be posting this so soon after selling my last one (R32 V-spec), but here I am. We picked up another R32 GT-R yesterday from C-Red. It will predominantly be driven by my wife (with kids in the back), so if you see a red wine coloured R32 GT-R with Buddy Club P1's (Hypergold) on it, give her a wave. Number plates are VSPEC32.

She's on fairly stock condition at the moment, with the only mods being K&N filters, Exhaust and a couple of Nismo turbines. Power is a little low at this point because the turbs are only running at 0.5 bar and they probably only start working well around 1.0 bar. The P1's are brand new 17x9's with some basic (but new) Nankang 255 section rubber.

Keep an eye out for this one over the next couple of years. Plans include PFC and associated Apexi EBC. Brake upgrade (I'm wishing for some Brembos as were on my last one), suspension, clutch, pump and injectors.

Anyway, keep an eye out and say g'day.

Cheers

Brendan

Link to comment
https://www.sau.com.au/forums/topic/8398-new-r32-r-on-the-road/
Share on other sites

Have you still got the old plates that you used to have? VSPEC32

can't go wrong with the wine red colour hey Brendan! .....Skyzer even though he has a 32 he can be part of our sexy red line gang :-)

Wind those advanced turbo puppies up and gimme a dyno reading! :uh-huh:

Is there much of a cabin size difference between the silvia and the 32 GTR?

Pics??

Yep, brought the plates out of storage and put onto the 'R. The cabin size is considerably bigger (mainly length) than the Silvia. And the boot's a little bigger too. Had basic pics taken yesterday, will post up once I get them (mate took them).

Cheers

Brendan

Hi Brenden,

I was at the Silvia club cruise last night, the purple R33 GTR. VERY Nice ride man.. I was sure I had seen those plates on a Gun metal grey 32 before. Sorry I didn't get a chance to come and say hi.

My girlfriend was stoked when you turned up with the baby seats in the back and the missus driving, I've been telling her for ages they are great family cars and you just proved it last night!!!! ha ha ha

Will introduce myself next time I see ya.

Brett

G'day Brett. Nice to meet you. Glad to help out the missus see the light. The grey/blue one you saw the plates on was my old 'R I sold last year. Was costing me too much. This one was bought as a replacement to a Camry Wagon, which although a good car, we (or I) wanted to get back into an 'R. The wife is very happy with it too. I must say though that a 4-door is definitely a requirement for kiddies until they're walking and able to climb up into their own chairs. This is mainly due to the child seat needing to be put in upright and not in the lay down position for infants. We did try that once or twice in the old 'R, but the front passenger was a long way forward.

You can check out my previous 'R on my web site (see sig).

Cheers

Brendan

Yep, that'd be me. That was a top car which now resides in your home town of Melbourne. Pretty much showroom condition with the right amount of mods. Unfortunately is was just costing way too much (being a rare and top quality V-spec). This one now will be modded a fair amount over the next few years (along side my Silvia). Having the Nismo turbos already in makes it just bolt-on parts now to get the best out of 'em.

Cheers

Brendan

Well they're coming down in price and most just need a good tidy up to get into top condition. This red one has a few small dents and a little paint work required (door mirrors are quite bad), but it's cheap to have small dents removed and basic painting done and worth it when the car looks the goods. I did have some problems with one of the AFM's, but that's fixed now. Of course a future mod will be to go to Z32 AFM's to help the turbos breath well, but that won't be until the PFC and BC are in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...