Jump to content
SAU Community

Recommended Posts

Nissan's Murano (spelling?) is now for sale in Aust. I think it is a great move and ever since my trip to Canada 2 months ago have been wondering why we miss out on cars like this and the Infinity series (G35 in particular).

I think they are one of the best looking 4wd's going around. Not sure about it's off road credentials or levels of equipment.

What are your thoughts?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/84323-the-murano-in-aust/
Share on other sites

I think the murano is going to replace my current 4.4 X5, I'm staggered by the level of built quality and equipements for the money!!!

hey hungry6

are you really willing to give up one of the best sounding v8's on the road? not sure about the 4.4l but the 4.8l sounds awesome.

maybe with a little exhaust work the 3.5 murano would sound good.

hey hungry6

are you really willing to give up one of the best sounding v8's on the road?  not sure about the 4.4l but the 4.8l sounds awesome.

maybe with a little exhaust work the 3.5 murano would sound good.

Nar, I'm not going to miss the X5 trust me, As for the exhaust note, my Audi RS6 has got the best stock exhaust note in the business, bar non!!

Nar, I'm not going to miss the X5 trust me, As for the exhaust note, my Audi RS6 has got the best stock exhaust note in the business, bar non!!

are you having me on hungry6? you don't have a RS6? do you!!! do you really have a X5.

i love the way the flames shoot from the exhaust on my RS6, on the playstation anyway.

We have them at work(i work for nissan) and to breifly explain them, its basically vomit on wheels. with tacky plastic interior.

I work at the same complex as Nissan Sydney Homebush and the Murano was first seen here months ago.

It doesn't even get a 2nd glance given there are so many 4WDs in this complex.

It's not as bad as you make out but as far as this forum is concerned, it's another 4WD.

T.

It is basically a front-wheel-drive wagon — like the Maxima — but gets power delivered to the rear wheels when the front wheels lose traction.

Murano isn't one for the bush, just a front-drive wagon that seats five adults

And the base model is $51,990

Good for what it is i guess..

i dont get nissan... wtf is with the 350z style being copied to every model  :D

Maybe its coz the 350z actually sells?

I'm pretty sure Nissan know much more about marketing their cars than you do.

No I'm not having anyone on, I got a few different set of wheels, and the RS6 in one of my fav. daily driver.

My brother is also on this forum and he drive a red one, mine is a one of custom blue.

If you are that rich and can afford a x5 and rs6 u dont also own a gts-t or gtr do ya????

If you are that rich and can afford a x5 and rs6 u dont also own a gts-t or gtr do ya????

I'm not trying to brag or what ever, as I've said before, my passion for skylines have date back ages before these forums came up, I think I might be the first person here to own a r32 gtr, one of the original aussie delivered one, but since have own others, I also enjoy my r33 gtst that is powered by a RB26det, more so than the others, as it is the car, that has been taken furthest away from it original intent by the manufacturer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...