Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm organising some number plates for my freshly complianced R32GTR.

I'm getting some standard sized plates, but was wondering if anyone know what the legalities were concerning stick on plates for the front? I've seen cars with the stick on's driving around, and think it would be a good idea so I don't block airflow to the intercooler. I also don't want to be drilling holes in my bumper.

If anyone has any (reliable) information about this, that'd be great.

I've requested a copy of the number plate legislation from Transport SA, but I'd be really keen to know from ppl who have the stick on's if you've been hassled by the cops etc.

Cheers,

Alan ;)

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/
Share on other sites

Any number plate not manufactured by a Transport SA approved manufacturer (I think there's only 1 in SA) is 100% illegal.

I'ven been warned for plates before on a previous car, so I did some research. Basically only the ones they issue are ok.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1528997
Share on other sites

Only plates made by an approved manufacturer comply with the requirements of the Motor Vehicles Act. The display of non-approved plates incurs the risk of a Traffic Infringement Notice and a fine.

Plates must be visible from the front and rear and must not be obscured by a tow ball, load, plastic cover, dirt build-up or any part of the vehicle’s bodywork. Operating a vehicle in this condition renders the driver liable to receiving a Traffic Infringement Notice.

Got this off their site for you.

Couldn't find a list of "approved manufacturers" though.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1532137
Share on other sites

I received the actual legislation for this today as well.

Pretty much what you've found on the website.

So now we all *know* it's illegal, but is it worth taking the risk to do it?

What are the ramifications of a Traffic Infringement notice? Fine? Demerit points?? Defect and Regency inspection?

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1532492
Share on other sites

The number plates transportsa issues don't fit. :(

On the R32 you are required to either bend the edges or trim them. Mine were trimmed neatly, obviously this is illegal but what else can we do?

I haven't been pinged for it as they are trimmed in such a manner its hard see unless you get down on your knees.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1535346
Share on other sites

OK how about this question:

Do the authorities target cars with any form of personalised plates?

I currently have a set of premium plates on my MX-5 with some nice lucky numbers (superstitious asian stuff). I can simply transfer these across to my GTR if this is going to be an issue.

I did get a nice set of plates for the GTR tho, something related to "RB26" :(

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1535403
Share on other sites

well, the short answer is yes they do (as told to me by a forum member on NissanSilvia.com who is a copper), however I have distinctive peronalised plates and have not been targeted.

In fact for the extremely large amount of time I spend on the road, it is a wonder I never get pulled up. The only very few times I have been pulled over I brought it on myself and deserved it. However, I am not out cruising the hotspots Friday and Staurday nights .... that is just begging for trouble.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1535412
Share on other sites

you can get transport SA approved plates for your push bike rack that goes on your towbar right... those little ones about half the size.

Correct me if I'm wrong, but the legislation doesn't mention size does it? Order 2 bike rack ones and use them :)

and put them on upside down....

I'm sure the legislation doesnt say anything about this...

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1538674
Share on other sites

I thought of that already, but unfortunately the legislation *does* specify the size of the plates.

You could always play dumb and do the "sorry officer, I didn't know" routine, but I doubt that's going to get you off more than once.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1538709
Share on other sites

Not sure about the bike rack number plates, prob a bit of a flaw in the system there, but i'm sure they could get you on it somehow, best to just get the slim plates and not worry about it.

I couldn't be bothered paying $170 or what ever it is a year for custom plates so i ended up getting R and S series plates, think it was $70 for ever, and i can swap to what ever car i want. Works out well with the RB and SR.

Link to comment
https://www.sau.com.au/forums/topic/84491-number-plate/#findComment-1538712
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...