Jump to content
SAU Community

Dr30 Seatbelts..help!

NeoLokie
 Share

Recommended Posts

NeoLokie Enthusiast

NeoLokie

Posted
  • Author
Posted

hey guys.. know this is an old thread but still..

ordered belts from klipan, don't know the part numbers off hand, but they're basically r30 belts with a drop link added (the bit off the roof). They aren't here yet.. and it was a nightmare talking to 15 different people to get them.

They better fit!

Boof Mentor

Boof

Posted
Posted

Sounds good mate, let us know the part number when they arrive and if they fit or not for i can see me loosing my shit trying to wiggle everything through that drop link!!!!

What sorta coin did they slug you for those btw?

boj01 Experienced

boj01

Posted
Posted

I purchased my Klippan Belts through an Auto One parts shop here in Newcastle. Luckily I knew one of the boys who worked there. His brother imported a DR30 6 months before I did so I matched up some new belts easily. $220 for the pair, they pretty much bolted straight into my car and I used the original dangly bit off the roof. Just use your common sense when putting them in.

I just ducked out to the garage and luckily I've still got the Klippan box with my old belts inside it. The part number for the belts I used was K6570. Hope you ordered the correct ones.

In the rear, my engineer passed my car with brand new Klippan non-retractable lap-sash belts.

NeoLokie Enthusiast

NeoLokie

Posted
  • Author
Posted

ok.. here are the part numbers. the belt and stem K6260. The fitting kit, which is just a multi-fit plate with a bunch of holes that you have to cut off to suit.. k4425. If you had an angle grinder etc you could possibly grind of the rivets on the original bracket and use it.

The droplink is k7099.

All bolted in nicely. Took about 20 minutes a side I think including the bracket cutting using the dodgy as saw that I have :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...