Jump to content
SAU Community

Recommended Posts

ah, the BOSS kit BTW is HBK ON-115, not the ON-110

The ON-110 is for the NON-HICAS GTS-ts (and GTS4's I think)

The ON-115 is compatible with HICAS

As silver said, that is incorrect. The HKB ON-110 is the correct boss for use on the R32 GT-R (except for the V-specs I think, but my Japanese isn't good and it could be all 92-94 GT-Rs) and is designed for HICAS. The prongs (on the early GT-Rs) are meant to be slightly offset: if you have them at 12 and 6 o'clock you've got the wrong alignment.

Edit: Here is the HKB site the gives you the model numbers:

http://www.hkbsports.com/product/boss/nissan/nissan.html

Lucien.

The only problem i have had with my HICAS is when the turbo timer is running. The light flashes and if you move the steering wheel you can feel it being pulled around. The first time it happened i heard something crunching in the rear end but the HICAS still works fine. A mate of mine had his HICAS in his 300zx play up at 80kmph and it was scary cos the rear end was all over the road.

check the drop down list here:

http://www.wheelspin.com.au/catalog/produc...products_id=448

the listed ON-110 is for the R32 GTS or GTS-t and the ON-115 is for the R32 GTR (and S13)

OK, i beleive you guys that its the ON-110 for the R32 GTR, I got my info from wheelspin tho.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...