Jump to content
SAU Community

Recommended Posts

G'day folks

Item:"writeoff" not "statutory writeoff" selling complete car with or without wheels

Location:Fairfield West

Item Condition:1994 R33 non-turbo, automatic 97xxxkms, car was ram from behind at a red light then kissed the ass of the car in front, engine still good, damaged is only on the outside, inside is in immaculate condition, no tear of wear and also non-smoker.

Car still start and drive but not recommneded :D

Price and Payment Conditions:Price is $2500ono complete, front tyres just got changed recently.

Pick up only

Extra Info:think thats all the info for now folks.

Contact Details:Call after 3.30pm 0415 243 245 or 0402 712 813

Photos are below, they are not the best, some are a bit blurry but thats because of the camera not me:)

rego till the end of oct, 2005

Edited by dOOb
Link to comment
https://www.sau.com.au/forums/topic/84972-fs-damaged-black-r33-skyline/
Share on other sites

ok for all you folks who wants to see the damage. in my opion the front can be hammered if you have patients, the rear is a bit more tricky, good for those owner who has a burnt out interior or damaged int. :) or just another skyline for wrecking

post-16344-1124746854.jpg

post-16344-1124746878.jpg

post-16344-1124746892.jpg

post-16344-1124746901.jpg

post-16344-1124746911.jpg

post-16344-1124746921.jpg

post-16344-1124747060.jpg

Edited by dOOb
what size are rims/wheels and price?

bummer ur front bar is busted i need a new stocko, i rear ended someone :D

the wheels are 17s dont know the tyre size, have to check, can't help you with the bar, not the just the front but the rear bar is gone too. :)

dude im intrested wat are the mag sizes but mainly wat are the tyres sizes

dude the wheels are 17s, not sure on the tyre size maybe 225/235 35 17, i'll check

GUYS I'LL WON'T BE ABLE TO SELLL THE RIMS BEFORE SOME ONE TAKES THE CAR AWAY!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...