Jump to content
SAU Community

plex 15th


Recommended Posts

rev210,

I managed to beat that R34 last time, I think I got lucky though. You better be quick though, sounds like he has got a big turbo and race tyres on order.

I doubt that the S-AFC will get you to 12's or 113mph, but you could be the fastest stock-tubo GTS-t around.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8519-plex-15th/page/10/#findComment-134761
Share on other sites

  • Replies 261
  • Created
  • Last Reply

Top Posters In This Topic

Unless your using a shitload of Toluene, I can't see it making much difference unless you adjust your base timing. You should be able to run more advance with it in. But you weren't running full boost last time were you?

Maybe it's time for that FMIC?haha.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8519-plex-15th/page/10/#findComment-134859
Share on other sites

Originally posted by GTS-t VSPEC

Unless your using a shitload of Toluene, I can't see it making much difference unless you adjust your base timing. You should be able to run more advance with it in. But you weren't running full boost last time were you?

Maybe it's time for that FMIC?haha.

See'ya:burnout:

20% or so is all that will be necessary. 4L in 20L of fuel is quite an eye opener. I suggest you try it.

I think I'll buy some nice rims and tyres before the fmic, after all both those mods are about looks more than anything :lol:

I ran around 10psi last time, on the 13.4 run. Thats what I consider to be 'full' boost.

Link to comment
https://www.sau.com.au/forums/topic/8519-plex-15th/page/10/#findComment-134952
Share on other sites

Rhino,

I know he was running only a FMIC and boost, putting out 208rwhp at the dyno, but he has ordered a big turbo etc, which should be going on soon. He's after big power, and he's got the money to do it.

Rev210,

I'll be keen to see the difference that the toluene makes to your times, if the difference is noticable then I may try it myself.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8519-plex-15th/page/10/#findComment-134969
Share on other sites

Yeah, you can just buy it from the hardware store. rev210 has a place he uses, but most stores have it, works the same as an octane booster, but may provide more power aswell.

I'm planning on running the VP 103, but at $110 per 20 litres, it's only good for the drags.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8519-plex-15th/page/10/#findComment-135163
Share on other sites

Macka: dude most stores DON'T have it, I should know I've looked in just about all of them.

Makit Hardware in Balcatta next to marlows balcatta. bout $24 for the 4L tin. Compares nicely with the cost of VP 103 for smaller volumes and craps on it for octane and energy value, it's just not as 'green'.

It's well worth a try I have a litre in the fuel at the moment (20% mix) and it gives a good old kick.

I'm sure you will like the extra timing Macka.

Link to comment
https://www.sau.com.au/forums/topic/8519-plex-15th/page/10/#findComment-135197
Share on other sites

Bringing two members together, I feel like a match maker.

Although Osc@r had problems with spiking I don't think this will be as bad on a stock turbo, I used one for a while and it seemed to do OK, but compared to an EBC they suck.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/8519-plex-15th/page/10/#findComment-136436
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...