Jump to content
SAU Community

Recommended Posts

Hi,

I have taken the standard headunit out of my gtr to find a mess of wires behind (from a previous stereo). My problem is that when i test each of the wires for a battery wire I don't find anything with the digi meter.

Going by standard Nissan Wiring it should be black w/ red stripes but these provide nothing (I found 2 ??).

I checked all the fuses under the steering column individually and they are all fine.

Any ideas at all?

TIA Jon

Link to comment
https://www.sau.com.au/forums/topic/85476-help-with-head-unit-install-query/
Share on other sites

blk/red is the antenna trigger. are the factory plugs still on it?

you should have 4 twisted pairs of wires. these are front and rear. the gtr has that annoying amp in the rear shelf that should have been bypassed already.

red/blu is lights , should be a blue/? one that is +12v key and the other one should be a red..

( haven't worked on a skyline for a few weeks so I can't remember the colours.)

if the plugs are still on it buy an adapting plug and use that. makes life easier.

Thanks for the quick replies.

The factory unit was working when I removed it

The original plugs are all gone.

I will try and investigate further now.

After testing every wire I cannot find a +12v battery, what other things could I try?

worst case senario you could always just run a new wire from your battery..

.. have you been able to measure 12v on the ignition and lighting leads? might sound silly, but are you sure you have a good ground for your multimeter?..

cheers,

damo

You sure your using your multimeter correctly? You'd wanna have it on the 20v setting, then be testing each wire with your red probe, whilst always having your black probe grounded (could use your earth wire for the HU if u know which one it is, or the cigarette lighter, or even the headunit chassis is usually earthed also).

Best of luck,

Nasha

there is 12V memory there. you have a blown fuse. do a physical check ( remove and inspect.) every fuse. you shouldn't have an interior light currently. the fuse you are after should be outside.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...