Jump to content
SAU Community

Recommended Posts

Hi guys, as many of you know I have been planning a big purchase on Recaro style bucket seats. This is now going ahead!!!

COLORS AVAILABLE:

To see a close up of all the colors available please go here: HERE - www.gktech.com.au

Price:

The price for material seats will be $360 if paid for in full, or $380 if paid 50 / 50 (50 % deposit before the pre buy ends and the remainder 50% in 5-6 weeks time)

Leather seats will be $100 more than material but are much much nicer and I reccomend the leathers to all!!

Individual seats are available for $210 for material and $260 for leather.

Info:

The seats come with universal rails and can be adapted to suit any car quite easily (welding skills needed, but nothing major)

Once the pre buy ends stock will take around 4-5 weeks to land and clear customs.

Freight / Pickup:

Prices for freight will be confirmed over the next few days. No more than $100 Australia wide from previous experiences.

We are located in Werribee, Victoria, pickup is more than welcome ;)

Payment options:

You can pay by the following methods:

Cash - come to us in Werribee, Victoria and pay cash upfront.

Direct deposit - cheque - money order - Please go here for all information: Payment details

PayPal - For PayPal please make payment to: [email protected]

How to order:

Please download this form: HERE, fill it in and email to [email protected] If you do not get a response within 24 hours please re-email. We reply to all our emails within 24 hours.

Here are the pics:

(the marks on the seats are just form where they were poorly transported, all seats in the pre-buy will be coming in our own container)

DSCF0314.jpg

DSCF0315.jpg

DSCF0316.jpg

DSCF0317.jpg

DSCF0318.jpg

DSCF0319.jpg

DSCF0320.jpg

DSCF0321.jpg

DSCF0322.jpg

DSCF0323.jpg

DSCF0325.jpg

DSCF0326.jpg

DSCF0327.jpg

DSCF0328.jpg

DSCF0329.jpg

DSCF0330.jpg

More pics coming soon :D

Cheers,

Greg Kruse - GK Technologies

www.gktech.com.au

What state are you in mate? This can be organised if in Vic (should be around $150 to $200 a pair in skylines)

Unfortunately no pictures of the yellow leather. The seats pictured are the ones I got in as samples. Im sure you can imagine what they look like ;)

cheers,

Greg Kruse - GK Technologies

www.gktech.com.au

Hi mate, unfortunately I don't have anyone over in WA to install but any workshop can do it for you. Very easy ;)

Don't pay more than $100 a seat to be installed.

cheers,

Greg Kruse - GK Technologies

www.gktech.com.au

Hi mate, these seats are made to meet ADR standards but are not ADR approved (have not been tested as it is very expesnive and will increase the cost of the seats quite significantly)

Cheers,

Greg Kruse - GK Technologies

www.gktech.com.au

Could you please pm me your ph no becase I would be very interested in coming and having a look at a pair of the black leather seats on monday.

I will be in Hong Kong from this Sunday until the 3rd of October.

You can contact me on 0401554476.

cheers,

Greg Kruse - GK Technologies

www.gktech.com.au

  • 1 month later...


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...