Jump to content
SAU Community

Recommended Posts

hey guys ive owned an r32gtst auto(unfortunatley) for about 2 years now and had a blown tranny, i got one from a wrecker as i am selling the car, after ui done that i found the turbo was seized and changed that, after that it wasnt running perfect but still alright, then that gearbox, goodbye (ekw have the worst parts) so i went and bought an r33gtst gearbox (again secondhand) and the gearbox seems fine, oil is nice and pinka nd everything, i put it in but my car runs incerdibly sluggish, takes off very slowly doesnt come on too boost as hard e.t.c, it has 145 kms on it and its going too one of my mates so i wanna fix this prob for him, wats your opinions, any help would be greatly appreciated???

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/
Share on other sites

I'm no guru on GTS autos but the ecu runs the trans.....so if you have a 32 with a 33 trans....they are most likely diffrent and its taking off in a higher gear or something to that effect

Thankz bro ill look into that, any other ideas though as the wrceker i got it off reckoned there would be no dramas and he does alotta work on r32's

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1561488
Share on other sites

afaik R32 and R33 autos are exactly the same.. they are both RE4R01A boxes of same specifications.. and they are used in a few other nissans as well (pathfinder, etc) in the 90's.

What makes you think its specifically a problem with the auto?

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1561825
Share on other sites

afaik R32 and R33 autos are exactly the same.. they are both RE4R01A boxes of same specifications.. and they are used in a few other nissans as well (pathfinder, etc) in the 90's.

What makes you think its specifically a problem with the auto?

i dont necessarily think its the auto,i checked the gearbox oil, nice and pink, its not slippin or anything, drives smoothly, it just takes off really slowly and is driving sluggy, it still comes on too bosst but not very hard, it hasnt been serviced in a while or ti could need a tune up im not sure just wanted to get some feedback, if i cant work it out ill take it too da mechanics but when he feeds me alotta shit i gotta have sum idea on wats going on

any help is appreciated, thankz

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1562680
Share on other sites

afaik R32 and R33 autos are exactly the same.. they are both RE4R01A boxes of same specifications.. and they are used in a few other nissans as well (pathfinder, etc) in the 90's.

What makes you think its specifically a problem with the auto?

so all the detent solenoids ect are the same???

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1562896
Share on other sites

I know you are probably just biting there troy..

but for all replacement/service parts for these boxes I can find no revision number differences mentioned for the transmission across years (except for the latter r34 models) which would indicate subtle differences and internal parts. This checks out in FAST also.

It is possible they've stuffed the wiring or install of course..

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1562997
Share on other sites

I reckon just change the box oil to be sure. You don't have to go all on out and buy motul atf or anyhting. just buy some cheap castrol. Shouldn't set you back more than $50. try that first. Like troy said, just in case if it's got water in it, or it's simply the wrong viscosity.

I dunno why they left it with oil in it anyway, nor why you'd trust random oil in a box anyway. For all you know, it could be used cooking oil mixed with powersteering/atf to get the pink colour.

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1563099
Share on other sites

okay guys let me add a few fings here, an auto transmission is supposed to have red oil, black only if its a manual, the gearbox was drained, i was the one who put the oil in the box when done, (dextron 3), the installation i dont think is a problem i think it is something else with my car, the gearbox changes gears fine as its sposed too so it cant be that,

any ideas??

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1563235
Share on other sites

Yep ATF is pink/red.

As for why its been sluggish, It could be anything from a fuel problem to your air flow meter not working right. You just have to work through it, Even your throttle position sensor may not be reading correctly. If you find a workshop manual and your handy with a multimeter you should be able to check out your sensors and see if they are within spec.

Cheers

Sumo

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1565794
Share on other sites

thankz summo,

i thought i was goning mad atf not being red, i didnt know wat was going on, my afm is a bit funny, cause i dont have a standard one in it the last moron who had my car was a reject and treated her so badly i will start searchin and let you know how i go

Link to comment
https://www.sau.com.au/forums/topic/86216-help-guys-asap/#findComment-1565989
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...