Jump to content
SAU Community

check this engine out!

Guest ylwgtr

By Guest ylwgtr,
in General Automotive Discussion

 Share

Recommended Posts

Guest ylwgtr

Guest ylwgtr

Posted
Posted

this engine is a V12 jaguar block fitted with 6CYL 24 valve twin cam head which have been converted to belt drive!Note one head had to be fitted on backwards so to have both the inlets in the centre of the engine...vast amount of work is unseen...with the cams extended,valve covers shortened..this motor is fitted in a mid mount configuration of an e type jag...The e types are very ugly..not this one!It has 11/2 feet removed from the front of the vehicle and placed at the rear...it has an RX7 series 6 hatch on the back and looking through the rear hatch screen you see the valve covers....and 12 fkn big trumpets!!!!Its wiked...F1 style front suspesion i will post some pics soon

Guest nismogtsx

Guest nismogtsx

Posted
Posted

We want more pics......

YEAH thats a good idea nismogtsx... YEAH

I think he is rather tallanted (i think thats how to speel it)

I wish i had the time to do that sort of stuff... You see i have a very short attention span... If it aint finished in 5 monutes id better go and have another beer.... Then when i come back to it i dont remember what i was gonna do and it ends up in the corner...

Guest ylwgtr

Guest ylwgtr

Posted
Posted

It will most likely be an I.C.V..Individuly construted vehicle...Although this guy is a M.I.A.M.E so he can do anything as long as he uses his noggin and he can get away with it.In my experience..most of the guys that issue engineer's reports dont have a fkn clue about making stuff there knowledge is all theory.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...