Jump to content
SAU Community

Recommended Posts

Hey all,

Names DUNDAS and im new here.

I am dead set about my next car which will be an R32 2dr 5sp RB20DET....but im unsure of getting which of the two types of the AWD or the RWD... i currently drive an accord which i feel is awesome but lacks sum grunt that a standard turbo vehicle would have... i just want more torque :D/...

anyways.. it would be great for some input...

the positives and negatives of the 2 types RWD n AWD.

I was looking @ yahoomotorsports also...seems cheap and im not too fussed with respray.. but im unsure of the rusts that are on sum of the cars.

HELP ME OUT :(

Edited by dundas
Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/
Share on other sites

hey dundas! welcome to the forum :D

i would tend to go for the RWD R32 because they are more common (more to choose from), RWD is more fun to drive & a lot lighter, nimbler handling too.

AWD you would get the traction benefit, personally (if you decided AWD option) i would be inclined to save a bit more for a GT-R

anyways good luck with the search

sam

Edited by Sambo33
Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/#findComment-1567793
Share on other sites

Hey Dundas, Welcome to the SAU SA Section,

I would have to agree with Sam there, just remember with the AWD R32's you can bypass the relay a use only the RWD, But as Sam said save up for the GTR, otherwise don't worry about the AWD traction stuff and go hard in a RWD.

Hope you find what you want!!

Darren

Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/#findComment-1567910
Share on other sites

the gts-4 share the same gearbox with R32 GTR, which is good stuff.

Not sure how their 4wd works though (same as GTR?)

But if my memory serve me right they are pretty overweight compare to RWD version (14xxkg vs 12xxkg), which not working well with RB20, as RB20 has no down low torque :D

Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/#findComment-1568076
Share on other sites

Ohhh ok damnz, because i was looking @ yahoo motorsport- john..and many of them are AWD... i think id prefer rwd too they have the HICAS right.. which is great anyways. Ill just sell my car soon then i can be in the Skyline family :)

Anything to look out for.. obvious on the R32? Also how is rust fixed... is it difficult/ expensive???

Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/#findComment-1569725
Share on other sites

this should probabarbly be in the yahoo motorsport thread but does he allow you to test drive his cars, compression test them etc besides just visual inspection? If the answer is yes, then i guess the inspection of his cars would be easier for you dundas.

p.s welcome to sau-sa division =D

Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/#findComment-1569764
Share on other sites

this should probabarbly be in the yahoo motorsport thread but does he allow you to test drive his cars, compression test them etc besides just visual inspection? If the answer is yes, then i guess the inspection of his cars would be easier for you dundas.

p.s welcome to sau-sa division =D

Hey dude, mate i wouldnt have a clue about compression testing etc...

yeah i just didn't want to HIJACK the other dudes thread... would of felt bad :huh:

Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/#findComment-1570172
Share on other sites

GTS4 Atessa system is the same as the GTR.

The extra weight and drive-train loses would put me off AWD for a R32 with RB20DET, but if you seriously intend to swap in something bigger (i.e. RB25/26/30), then i'd consider it.

Personally I'd like a 4-Door GTS4 with a RB26.

AWD can have HICAS too, but don't get too excited by it, it's no where near as "bendy as Honda's 4WS (only 1 degree). You'll find many owners disable it, and IMHO it's a gimmick, in many cases makes the rear-end unpredicable when driving at 8/10 or more.

Link to comment
https://www.sau.com.au/forums/topic/86685-new-intro_/#findComment-1571978
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...