Jump to content
SAU Community

Recommended Posts

Dont some of the EVO models have rear facing vents?

But vents in most applications vents are a joke and make automotive engineers laugh when goons with no idea put them in. Even many factory vents serve not purpose. In some cases exit vents in the bonnet will reduce airflow around critical areas such as the oil filter, sump, front diff and oil cooler. Raising the rear of the bonnet is just as bad the air will flow through the radiator then up across the top of the engine and out the back. It will not flow over the exhaust manifolds, turbo, oil cooler, sump, diff and gear box.

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

even old SLR TORANAS have rear facing vents. well its a bonnet scoop really, but it faces backwards. need em for those fire breathing v8s but... not really.

a definitive answer on this topic would be great - on both what the ADR says, and about how effective/ineffective they are at keeping things cool. i figure if your cruising along slowly or parked in traffic a bit a rearward vent after the radiator would help, but if you are constantly hammering along at warp, maybe a fwd facing one, like the mighty rex has for its lil IC.

Was just told by a mate that it was proven that at speed air actually came out of the WRX scoop. There was a lot of air coming into the engine bay through tthe front of the car, creating positive pressure under the bonnet and had no where to go but out the scoop.................. dunno if it is true, but sounds plausable!

Plus wrx scoops are gay, I have seen them fitted on everything from a wr-excell to a stock corrolla.

Personally I would never get a forward facing scoop ever, but that is just me :P

well im not exactly going to be circuit racing and blowing hoses off my car so i have no qualms about throwing a bonnet on with a rearward facing scoop.

if the scoop sits after the radiator, before the front of the head, the only stuff that would come out is radiator fluid - which is not going to be much different than using your wiper washers as far as visibility goes. soon as i can GET one, im painting it, its on like donkey kong.

and Ska, i agree totally. seen one on an 89 laser. top that - should be a new thread - "crap we've seen wrx scoops on"

maybe its just the wording, but that made no sense to me whatsoever.

if the vent sits just after the radiator, the only fluid that could come out is from the radiator, which would be steam anyway (if its hot enough to build up pressure to blow of a pipe) which wouldnt be any more hazardous than wiper fluid, is my argument.

wow. cool. yet ANOTHER grey area. next time i get pulled over ill have to ask a cop. clear it up once and for all.

Asking a cop would probably prove to be the most unlikely, most unreliable way to figure out its legality.

The problem with that is that it'll be their interpretation of the rules (assuming they know them properly, and not all of them will) - so it might even depend on the mood that the particular cop is in on the day!

But regardless, here's hoping and best of luck getting a straight answer. Who knows, it might get us closer to an answer.

Nick T.

was in DMD image the other day to organise my kit and hit them up for details on a bonnet. They dont do stag bonnets, but can do me a fast and furious looking vented one for the paltry sum of 1500. they need to get one and make a mould off it. fantastic.

Don said if it were for more than one car, say two three or four, it would be considerably less. but i wouldnt want so many stags to have the same vented bonnet people will think its as standard as airbags.

thought about modifying my existing bonnet... dont know how fiberglass and metal would mix with that heat under it though. and suggestions or ideas or experiences or alternatives?

oh and dmd didnt have a WRX in site, let alone a scoop. love it. nissan central. few tricked out hondas...

<_< and terminal - your clear indicators go alright too...

Edited by qikstagea

lol i gave u a definitive answer - you cant have aftermarket rearward facing vents - well they can be rearward facing but CANT HAVE AN OPENING if they face backwards (only for looks is ok).

Here ya go:

An air scoop fitted to the bonnet of a vehicle must not intrude into the line of sight. An air scoop must not have an unobstructed rearward facing opening (an incident such as the bursting of a radiator hose could result in the windscreen becoming completely obscured). The maximum air scoop protection should not exceed 60 mm

Ive got a copy of the bit from the ADRs and licensing technical guidelines that says it. Even with front facing vents there's a load of guidelines and restrictions. Heres the scan of the front facing vent requirements too:

ScoopOpeningSize.jpg

And line of sight in relation to vents:

ScoopLineOfSight.jpg

so that covers scoops sitting OUT of the bonnet, but not vents that are cut into the bonnet. you read everything in this thread? doesnt seem too difinitive. what does "unobscured" entail> so if its a vent with mesh, its okay? see what i mean? and then theres the herrod rearward vent, among others. there are obviously ways around it, brazen.

dont be so quick to bend over for the government, champ. if you can register a car with a quad supercharged 26 litre engine (that, by the way, has a rearward facing scoop), im sure you can manage a vent in your bonnet.

so that covers scoops sitting OUT of the bonnet, but not vents that are cut into the bonnet. you read everything in this thread? doesnt seem too difinitive. what does "unobscured" entail> so if its a vent with mesh, its okay? see what i mean? and then theres the herrod rearward vent, among others. there are obviously ways around it, brazen.

dont be so quick to bend over for the government, champ. if you can register a car with a quad supercharged 26 litre engine (that, by the way, has a rearward facing scoop), im sure you can manage a vent in your bonnet.

oh dear... "unobstructed" means it cant get through (any liquid escape) - so mesh doesnt apply - pretty straight forward that one. The OUT of the bonet is just showing you max heights etc for line of sight... it still applies for vents INTO the bonnet - cant face rearward. You'll also note I said "aftermarket" - some pre-new-car-handover ADR approvals have been given (eg Herrod). So no I dont see what u mean - pretty straight forward to me after spending ages down the Technical Division reading through the ADRs and other guideliens with the Technical Manager over here in WA.... and yeah - as said in previous threads - maybe different over east - but normally things are MORE restrictive over there thna here in teh West. Its all just whether you'll get picked up though as to taking the risk - up to you - same thing with replacement front and rear bumpers - not allowed technically (can only have lip spoilers) - but peopel sell full front and rear bumpers for lancers and all sorts of shit - technically illegal - but hey never seen a lancer yellowed for the ricey bumpers though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...