Jump to content
SAU Community

Fri 14&29th Oct Drive Day, At The Creek $120


Recommended Posts

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

well it looks like i will be able to make it. i've been able to move forward one of the interviews to this afternoon.

now i better get my sh1t ready tonight. if not, who wants to help bleed my brakes at the track? :(

BB,

Good news, I happy to push the brake pedal for you if needed.

All lit looks like we will have 5 on the day.

Myself, BB, AZZR32, yogi and Ralph (S15 Friend).

Lets have some fun, reguardless of the weather!

not long to go now. it looks like i may be able to get done the stuff i need to do tonight. If not, I may take you up on that offer paul :(

what time is scrutineering?

well i just finished what i wanted to do. I've bled the brakes. checked the oil etc and even installed my new castor rods. I don't have time for a wheel allignment so i just did it by eye/feel. I think the castor may not be quite even, but i did measure them pretty accurately. It feels heaps better. much sharper turn in, and the wheel self centres quite aggressively. steering is quite a bit heavier, but it's certainly bareable.

hmm, i had better get some sleep, i may be a little late fellas (9:30 ish) apparently there is no scrutineering though so it shouldn't be a problem. :angry:

see you boys at the track!

WTF I thought I heard Skylines today while I was at work but I couldn't figure out why. I work right near Eastern Creek and went outside and thought I heard a GTR, then I heard more of them and so I was wondering what was going on. Glad I'm not imagining things...

Im interested in the 29th - is anyone going to that one???

It will be my first time on the Eastern Creek track, from the map on the website it looks like a lot of fun

Can you apply for the licence at the track ?

I had a mate go today, in his Camaro... did you guys see it? :(

Anyway hopefully it was a good day, I heard that an Evo8 rolled it?

yeah i saw it. black one. looked nice as i went past it hehe :(

yeah a few cars were coming off. track was pretty green after the rain earlier in the week.

Except for Yogi's little incidednt in the first 5 min, it was a good day (Just goes to show crap tyres have no place on a race track). Accidents and hold ups did make for a long day and not enough drive time in my mind, but again thats the worst thing about these days, they take their time to clean the track after incidents and with that many race team there are bound to be a few spin off's.

No pics and no lap times but Im sure every had a great time. I think we got ralph hooked on drive days as well.

Im interested in the 29th - is anyone going to that one???

It will be my first time on the Eastern Creek track, from the map on the website it looks like a lot of fun

Can you apply for the licence at the track ?

So I take it you guys had more fun than all other Sydneysiders on Saturday.

N1GTR,,,you can sign up on the day but it'd a little trickie. The ARDC and CAMs don't like us doing it and I can't guarantee you'll be allowed.Why not download the form from cams and send it in. Theres still time buddy.

I'm up for the 29th,EC diffs now in,gearbox is repaired and rear suspension has been freshened up.

Neil.




  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...