Gtr/rb26dett Extractors $750

[amosite]

Quote From manufacturers ad

I have spoken to a manufacturer who will be releasing their RB26 Manifolds shortly and with RRP set at $1299 is it definitely a viable and cheaper option compared to HKS headers.

General description:

Complete stainless steel (3mm thick!), mandrel bent and equal length headers/turbo extractors. Minimum gain we have seen is 12% (At the wheels) on a dead stock R32 GTR. These are a complete bolt on for all RB26 Engines and also have fittings for the factory heat shield.

Firstly these headers are brand new and construction is from mandrel bent stainless steel. Other popular brands have mild steel flanges that have been "chromed" (or Painted) giving it the stainless look but not the associated benefits. The difference in flanges is the stainless steel will aid in gasket life and reliability with pipes and flanges expanding at the same rate. I know I personally don't want to be changing gaskets in 6 to 12months time, this is an evident property of mild steel flanges mixed with SS pipes as they expand and contract at different rates, which eventually causes them to warp! Ours are constructed of the same grade Stainless steel so they won't do this- ever!

Mandrel bent pipe work in 3mm stainless and direct bolt on for all RB26 engines. We have also included a provision for the factory heat shield to keep under bonnet temp down. In addition, these can also be heat wrapped or HPC coated for further improvements

Included are:

-Headers (For 1 engine)

-Manifold to head gaskets

-Turbo Gasket

Bends and welds are kept to a minimum to improve exhaust velocity and pipe length is made as even as possible (equal length). With these fitted you will see a power increase from around 1800 RPM all the way to 8000 RPM (not all Rb26's rev to 8,000) providing a broad power range. This makes every day driving a lot more enjoyable especially for those of you who are running aftermarket turbo's. The car is really that much better to drive! With a stock turbo, the power/torque drop off above 6500 isn't as bad and boost comes on a little earlier providing stronger mid range torque that hits like a bomb. The top end power increase is due to 2 reasons. Firstly; boost doesn't drop off like the factory manifold does. Secondly; the efficiency and flow is improved at high rpm driving- this was optimized for people using turbo upgrades such as garrett and HKS turbo's. In Addition the collector flange has been closer match ported. If you have a look at the factory manifolds you will notice a fairly large step where the manifold mates to the turbo's. We have changed this to a smooth entry. Perfect for street/track cars.

In addition to this they also have a sound change which is inevitable with the velocity increase in the exhaust. The exhaust does sound tougher (higher pitched roar) with these fitted. Expect around 27 hp (at the wheels) on a stock RB26. Bigger gains have been seen with more modifications/better quality parts fitted but due to so many variables, the gains have been from 37 rwhp (about 20%) to a whopping 69 rw hp on a severely restricted car (This car had all the bolt on goodies and ended up making just over 500 hp (at all 4 wheels). This makes for a cost effective power increase!

This doesn't just add top end power but increases overall power and power under the graph making your car overall quicker in a variety of situations including out of corners, partial throttle, up steep hills etc. Its easy to make something that improves power, but improving power over the entire useable RPM range and partial throttle is not so easy. Not only this, we have seen full boost reached 400 rpm earlier on a stock car and nearly 950 RPM on a more modified car. This makes a massive difference to the fun factor especially on the street and accelerating out of the corners. Unfortunately the dyno graph doesn't show partial throttle improvements in response, drivability and off boost torque. This will fit your stock turbo or other bolt on's such as nismo's, HKS, PE, Apexi, Greddy turbo's.

There is no pick up available and all items are shipped via courier with online tracking, insurance and is next day delivery to east coast metro cities ($30) All other cities POA

They are not available for any other skyline!

RRP is $1299, I have worked out a deal for 10 sets at $750

These are available to ship immediatly and will be available until all 10 sets are sold out!

High res pic's available: Email [email protected]

[Blitz]

Closed.

Please consult the rules for running a group buy before opening another thread.

Thank you