Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

Hello Boostor, but I am going now. After an hour of messing about with the computer, finally getting on the site, I have to leave. Have a good weekend, I will be working night shift.

Should get some of the boys to come down and rev their engines infront of the nursing home at around 2am.

Originally posted by macka

Juha Kankenin (spelling) is down for it??

and racing his new mitsubishi prototype apparently

Gees , it's quiet in here tonight ?

Macka you knoob , it Juha Kangas in a Mitsubishi evo 7 running under the Les Walkden banner from Tasmania.

Juha Kankunnen is an ex WRC Hyundai driver who wouldn't and couldn't come over here for anything less than Rally Oz.

If your coming down , cruise out to the real rally stages on Saturday and Sunday were the Rally is based around Nannup.

Will be there looking after 5 cars for Maximum Motorsport.

Cheers

Ken

Originally posted by GTS-t VSPEC

Hi Ken,

I seem to be having troubles with this thread, are you?

See'ya:burnout:

why , cos of the amount of booze you consumed with Macka ?

Nope , works fine for me.

Cheers

ken

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...