Jump to content
SAU Community

Recommended Posts

have any of you guys ever seen altezza lights for skylines?

im putting in projector lenses for my headlights, but its going to be a manual job, of using either vx commodore lenses or another kind. i dont want the lense to be too small as the larger the gap around will have to be. should make the xenon's look twice as good and light up more road than street signs and ambo's, but i can see a cop from 500m away.

apparently r33 series 2 GTR had xenon lights had the projector, but they're hard to come buy at a decent price, e.g. 400+ per light.

any comments would be appreciated.

and do you think they would look any good?

luke

Link to comment
https://www.sau.com.au/forums/topic/88308-altezza-lights/
Share on other sites

VIVA Garage have some clear tail lights, not too sure on the price, thinking about $800, havn't seen too many sets of them around! I would buy them but i have better mods to worry about than lights(the GO GO GO GO fast bits).

well the first thing people notice is with their eyes and ears so i thought cosmetics would be a good start.

also may make the car look newer, as the lights make the car look aged.

Link to comment
https://www.sau.com.au/forums/topic/88308-altezza-lights/#findComment-1595843
Share on other sites

Well i picked up a right side damaged holden headlight from claridge, and am in the process of fitting the projector lense to the Skyline headlight. will post some picks up along the way.

need to order another HID set as the Holden takes a H11 globe.

so when they arrive, its all a matter of pulling apart the nissan headlight, using the existing silver surround of the holden lense and cutting it to fit into the low-beam of each headlight. its a pretty similar fit so should look good.

ive started the right side and ill let you know how it goes.

Link to comment
https://www.sau.com.au/forums/topic/88308-altezza-lights/#findComment-1603818
Share on other sites

well its only labour. im using holden vy series lights and basically cutting the surround down to size. then u melt your healidht, unscrew the existing surround and fit this one in with a few cuts.

you could do it with any projector lense headlight, but it depends how neat u want it.

im getting the parts for free from a crash repair, and it looks like a 100grand merc when its at a set of lights.

replacement cost of the holden headlights is 360 each to buy so depends how much u want it, otherwise u have to wait for a crash repairer to get some. im still waiting for the left side to finish.

but u do need H11 globes @ 45 each otherwise a H11 HID kit at around 350-400

Link to comment
https://www.sau.com.au/forums/topic/88308-altezza-lights/#findComment-1635549
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...