Jump to content
SAU Community

Recommended Posts

Yeah, i only got the tiptronic myself, becuase the nice yellow manual he had was going to cost me 10K more, and like u said, tiptronic, why not, change gears on steering wheel, and hold a beverage lol

Link to comment
https://www.sau.com.au/forums/topic/88409-r34-tiptronic/#findComment-1596009
Share on other sites

I blew mine up by taking it to the track a lot. I had 189rwkw for a while and that's when the damage was done. Then I got 228rwkw and it blew the night I got it back from the mechanics.

Heat gets to them.

Check the group buy section for valvebody replacements and the info in there.

Link to comment
https://www.sau.com.au/forums/topic/88409-r34-tiptronic/#findComment-1596666
Share on other sites

thanks abo bob, i'll take that on board as i have a full exhaust system and am ready to set the 34 up with a front mount and boost controll(14psi). with these mods i am hoping to see somewhere round 200 rwkw's, hoping.

Becareful...at 14psi u might blow ur turbo before damaging the GB.

Link to comment
https://www.sau.com.au/forums/topic/88409-r34-tiptronic/#findComment-1597620
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...