Jump to content
SAU Community

Recommended Posts

(Use this as a guide for new threads. Delete and/or copy the fields as needed - dont forget to add your location in the description field above. Delete this message)

Item:

Location:

Item Condition:

Reason for Selling:

Price and Payment Conditions:

Extra Info:

Contact Details:

EDITED ALL PRICES DROPED!!!!!

Here are good tyres i have had lying around need to clean up

2X 245/40/17 Continental Conti Sport 90% tread = $180 the pair

2X 225/50/16 Continental Conti Sport (Burnouts) = $10 the pair

1X 225/40/18 Michelin Pilot Sport 90% = $90

1X 225/55/16 Continental Conti Sport 85% slighty worn inner edge = $30

1X 235/35/19 Continental 70% = $100

1X 215/45/17 Bridgestone Potenza 99% = $80

1X 205/50/17 Bridgestone Potenza 99% = $80

1X 205/40/17 Dunlop SP3000a 99% = $80

THIS MUST GO!!!!!!!!!!!!! PM ME

thanks all must go

Edited by SXC_R33
Link to comment
https://www.sau.com.au/forums/topic/88604-tyres-4-salemust-go-cheap/
Share on other sites

OK no being rude but serious offers only not 100 for two immac tyres??? that are worth big bucks new, sorry mate wont let it go for that much !!!

Hey mate.

I'll give you $100 for the pair of 17" continentals.  Send me a message when you want me to pick them up and where to come to.

Cheers,

Mick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...