Jump to content
SAU Community

Recommended Posts

Heres a group buy for DBA 4000 series slotted rotors.

If I can move 10 sets (40 rotors) then we get the good price ;)

(Note - pairs can be purchased instead of a full set.)

dba4000.jpg

INFO:

All are the 4000 series slotted only.

R32 GTST (RB20DET)

Front (280mmx30mm) - $195.00each

Rear (297mmx18mm) - $195.00each

R33 GTST (RB25DET)

Front (296mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DET) non v-spec brembo

Front (296mmx32mm) - $200.00 each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DETT) V-spec brembo

Front (324mmx30mm) - $220.00each

Rear (300mmx22mm) - $195.00each

R33 & R34 GTR run the same brakes as the R32 GTR v-spec brembo.

Also Available :

R31 Skyline

Front slotted (non 4000 series) $150.00each

Rear slotted (non 4000 series) $150.00each

350Z (normal brakes)

Front (296mm x 24mm) - $195.00each

Rear (292mm x 16mm) - $205.00each

350Z (brembo brakes)

Front (4 piston 324mm x 30mm) - $220.00each

Rear (2 piston 322mm x 22mm) - $220.00each

More info at the DBA website

SHIPPING:

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Postage to Perth - Darwin - ACT - Alice, is a flate rate $44

The rotors are fairly heavy so all will be sent via courier.

FINISH DATE :

Ends - 25th Oct 05.

Payments due - 30th Oct 05.

Im getting 2 full sets (for me and a mate) so we only need to move 8 sets (16 pairs).

1/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

2/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

3/ mass_iv - R33 GTST (2xF) - PAID - PAID - sent.

4/ YLD-CHLD - R32 GTR (2xF & 2xR) - PAID - sent.

5/ SirSkyline - R33 GTST (2xF) - PAID - sent.

6/ Pretender - R33 GTST (2xF & 2xR) - PAID - sent.

7/ nisr32 - R32 GTST (2xF & 2xR) - ??????????????

8/ gR33ddy - R32 GTST (2xF) - PAID - sent

9/ private buyer - R33 GTST (2xF) - PAID - sent.

10/ Chicko's GTR32 - R32 GTR (2xF) - PAID - sent.

11/ shif_tea - R33 GTST (2xF) - PAID - sent.

12/ gtrGhosTDoGG11 - R33 GTST (2xF) - ??????????

:)

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

are these the kangaroo paw ones????

if so and for $200 each ill take a set of front discs, not sure if its r32GTR or r33GTST yet....

Yep, they are the kangaroo paw ones.

Link - 4000 series spec sheet

I'll include you in the list of buyers - you can confirm which type you require at any time.

:)

thanks Paul hope we reach 10 buyers, also wats the price without the group buy????

im still looking into what brakes are on my car so i have to go and measure the rotors....

thanks Paul hope we reach 10 buyers, also wats the price without the group buy????

im still looking into what brakes are on my car so i have to go and measure the rotors....

PM sent.

oh and Paul when do you think the due date for payment will be?

Payment can be made at anytime.

A couple of guys will be paying in about a week which is ok.

PM me when you are ready and I'll forward payment details.

Once your payment has been received your rotors will be sent.

Cheers :(

hey i would also like to know the price without group buy on r34 gtt front set

cheers,

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...