Jump to content
SAU Community

Recommended Posts

Heres a group buy for DBA 4000 series slotted rotors.

If I can move 10 sets (40 rotors) then we get the good price ;)

(Note - pairs can be purchased instead of a full set.)

dba4000.jpg

INFO:

All are the 4000 series slotted only.

R32 GTST (RB20DET)

Front (280mmx30mm) - $195.00each

Rear (297mmx18mm) - $195.00each

R33 GTST (RB25DET)

Front (296mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DET) non v-spec brembo

Front (296mmx32mm) - $200.00 each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DETT) V-spec brembo

Front (324mmx30mm) - $220.00each

Rear (300mmx22mm) - $195.00each

R33 & R34 GTR run the same brakes as the R32 GTR v-spec brembo.

Also Available :

R31 Skyline

Front slotted (non 4000 series) $150.00each

Rear slotted (non 4000 series) $150.00each

350Z (normal brakes)

Front (296mm x 24mm) - $195.00each

Rear (292mm x 16mm) - $205.00each

350Z (brembo brakes)

Front (4 piston 324mm x 30mm) - $220.00each

Rear (2 piston 322mm x 22mm) - $220.00each

More info at the DBA website

SHIPPING:

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Postage to Perth - Darwin - ACT - Alice, is a flate rate $44

The rotors are fairly heavy so all will be sent via courier.

FINISH DATE :

Ends - 25th Oct 05.

Payments due - 30th Oct 05.

Im getting 2 full sets (for me and a mate) so we only need to move 8 sets (16 pairs).

1/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

2/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

3/ mass_iv - R33 GTST (2xF) - PAID - PAID - sent.

4/ YLD-CHLD - R32 GTR (2xF & 2xR) - PAID - sent.

5/ SirSkyline - R33 GTST (2xF) - PAID - sent.

6/ Pretender - R33 GTST (2xF & 2xR) - PAID - sent.

7/ nisr32 - R32 GTST (2xF & 2xR) - ??????????????

8/ gR33ddy - R32 GTST (2xF) - PAID - sent

9/ private buyer - R33 GTST (2xF) - PAID - sent.

10/ Chicko's GTR32 - R32 GTR (2xF) - PAID - sent.

11/ shif_tea - R33 GTST (2xF) - PAID - sent.

12/ gtrGhosTDoGG11 - R33 GTST (2xF) - ??????????

:)

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

are these the kangaroo paw ones????

if so and for $200 each ill take a set of front discs, not sure if its r32GTR or r33GTST yet....

Yep, they are the kangaroo paw ones.

Link - 4000 series spec sheet

I'll include you in the list of buyers - you can confirm which type you require at any time.

:)

thanks Paul hope we reach 10 buyers, also wats the price without the group buy????

im still looking into what brakes are on my car so i have to go and measure the rotors....

thanks Paul hope we reach 10 buyers, also wats the price without the group buy????

im still looking into what brakes are on my car so i have to go and measure the rotors....

PM sent.

oh and Paul when do you think the due date for payment will be?

Payment can be made at anytime.

A couple of guys will be paying in about a week which is ok.

PM me when you are ready and I'll forward payment details.

Once your payment has been received your rotors will be sent.

Cheers :(

hey i would also like to know the price without group buy on r34 gtt front set

cheers,

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
×
×
  • Create New...