Jump to content
SAU Community

Recommended Posts

b4 any one starts yes i have searched and read, and called performance places and........had a pull in the process

My dilemma, I have a 89 r32 GTR pretty stock, just spun the clutch now slips almost all the time no new news there. Im looking at pumping around 300kwaw ish, and have been recommended a few different clutches, my car is a daily driver but also I drive my cars hard……..”ice performance”, and “race pace” have recommended a similar set up a excedy heavy duty cushion button clutch “10 puck was mentioned” and have told me that should be great for the power im after, not slip, take launches, and last for quite a while.

But other sources have told me as soon as I start to approach the 300kw mark it will spin….and have recommended a 3 or 4 puck excedy….keeping that in mind I have been told a 4 puck may only last me 2-3months……..

You can see that im getting nowhere fast each view contradicts the other…..and vice versa

I’m hoping to go single plate, at the moment any way

Just hoping some one can help verify whats been said just to make it a little more simple

1. I plan to run 300kwaw give or take

2. Don’t want clutch to spin

3. Want it to last

4. Want single plate

5. will be doing 6k launches

6. Don’t want to spend more then 2k

What will meet my criteria ??

Thanks :(

Link to comment
https://www.sau.com.au/forums/topic/90766-345-puckcushion-button-10puck/
Share on other sites

call up xtreme clutch... they have MANY clutches to suit you... or try www.xtremeclutch.com.au

I've heard they have some great 9 puck clutches (ceramic), which have very nice power handling and aren't much different to stock to drive on! :)

But generally, the less the number of pucks, and the higher rated the pressure plate, the harder it will be to drive.

Less pucks = pickup is ALOT more sudden, as you're applying all the clamping force over a much smaller area... aka. jerky! can't really ride them as much - not that you should ride your clutch... I personally wouldn't go for a 3 puck clutch... lowest is probably 5 puck i'd go, then i'd go to a twin plate or similar (for street use).

The higher rated the pressure plate, the stronger the clamping force. While this sounds good, it will also be alot "heavier" on your leg... which again, affects driveability (makes it harder to "modulate" the clutch).

Nismo Coppermix twin plate is around $2k from nengun. Will take that much power and drives like a stock car. There are at least two GTRs I know of running this clutch on here and they both say its fantastic.

Other than that - Jim Berry in QLD would be able to build you a clutch to suit your application. Search the forums for his name.

Nismo coppermix twin plate , fantastic clutch and it feels almost like a stocker , especialy if you use the bigger nismo slave with it .

It comes with a lighter flywheel a new release bearing and new flywheel bolts .

I dont know if you can get a push nismo twin clutch to suit your 99 32 , check it out on the Nismo website .

b4 any one starts yes i have searched and read, and called performance places and........had a pull in the process

My dilemma, I have a 89 r32 GTR pretty stock, just spun the clutch now slips almost all the time no new news there. Im looking at pumping around 300kwaw ish, and have been recommended a few different clutches, my car is a daily driver but also I drive my cars hard……..”ice performance”, and “race pace”  have recommended a similar set up a excedy heavy duty cushion button clutch “10 puck was mentioned” and have told me that should be great for the power im after, not slip, take launches, and last for quite a while.

But other sources have told me as soon as I start to approach the 300kw mark it will spin….and have recommended a 3 or 4 puck excedy….keeping that in mind I have been told a 4 puck may only last me 2-3months……..

You can see that im getting nowhere fast each view contradicts the other…..and vice versa

I’m hoping to go single plate, at the moment any way

Just hoping some one can help verify whats been said just to make it a little more simple

1. I plan to run 300kwaw give or take

2. Don’t want clutch to spin

3. Want it to last

4. Want single plate

5.            will be doing 6k launches

6. Don’t want to spend more then 2k

What will meet my criteria ??

Thanks  :O

You're going to get different opinions here as well.

One thing is for sure. Do not get a solid centre clutch.

My opinion: I have a Jim berry clutch which cost around the $1000 mark, i drive my car daily and take it to the track, seems to be holding up well and is very easy to drive. I would recommend one of these, or get Ben from Racepace to get you one of the single plates he uses. also around the same price. Frank runs over 350rwkw and used one of the clutches Ben got for 2-3 years. and he doesn' go easy on his car :)

sewid is on the money go the Nismo Coppermix or get in contact with Jim Berry (Race Clutch) on (07) 3847 9999. Jim is very renown for making clutches that can handle abuse and last.

Over the years I have used so many clutches it is ridiculous. I was spending at least $1000 a clutch and they were running out faster than my fuel. I finally spoke to some guys in the know and they sent me down to "BGT Brakes" in Dandy. Anyway $400 later they had built me a 4 button ceramic clutch that they recon will last at least 3 years of hard driving. So far I have given it a very hard time and have also taken it to a few track days, feels as good as the day I got it.

I installed this clutch myself so all up it cost me just $400.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...