Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Nah, 13 is not too bad, at higher revs you want it to lean off a bit, that is were you can make some real power gains, too lean and bang. 12.0-12.8 is usually about right, and quite safe. Too lean is bad for all engines, not just R32 GTS.

See'ya:burnout:

old trick i have never done it...but heard about it...couldnt be took good but when travelling along kill the ignition and keep foot to floor then start car again. maybe it is just for carbie motors..but meant to send to 20foot flame and loud bang out the back. :-D

alternatively the new apexi PFC has misfire system, (anti-lagg) so u can set it up to burn excess fuel in the turbos and it apparently shoots flames out the exhaust..even with a cat?

mine pops and crackles like a bowl of rice bubbles. I love it, only had flames twice(i still run cats) from my exhaust. What we've done though is richen up my top end and a bit under trailing throttle to preserve engine on speed runs(depending on tempt its a safe guard of it leaning out to much).

The pops can be heard on my launching videos on my website when i lift off gives a bit pop pop crackle pop. :)

Got car booked in today to get a leak fixed(at the flange after extractors/before cats) and a balance pipe put in(deeper note hopefully) but also to get a cat replacement pipe made up for track days. No-one has wanted to make me up a set of screamer pipes yet ;)

I'd love a set, straight off the extractors exiting out the sides.. My old auto ute used to run hi flow cats(proper 1's with enlarged entries/exits etc and not a gutted cat) and it was loud as hell.. popped and crackled a bit(hadnt fiddled with ecu at time) but also droned alot less in cabin due to the cat not causing restriction.

Personally if you want to run without a cat, get a replacement pipe made up for track/drag work and "accidently" leave it on at times.. but dont be suprised when you get reamed if caught.. Alternative would be get some cats, gut them and fit them yourself.. no exhaust shop wants to touch the cats as if they do, they cop a $25,000 fine or there abouts(i've asked em :P). Overall though be careful, while its legal in some countries(nz, various states in USA) its highly illegal in australia.

A mate of mine has an R33 GTS-T with no cat and a big fuel reg. It drags flame about 2-3 feet for a few seconds after backing off at high rpm. We were standing in the Nasho at the 35 corner watching each other do fly bys. Locals at Stanwell wen't too happy!

Originally posted by Hicks

Have the external waste gate pointing to the road I say. Shoot the flames onto the bitumen.

My setup is just like this, but the flames came out the exhaust after letting off the throttle. Never from the wastgate (that I was told). Nice blue flames too, (that I was told) and a couple nices pops. No cat by the way.

Put cat in, stopped the flames.

An old very nice looking chev gets around these parts and must have the switch to do the flames. He quite often drives past us and lets them go. We first saw it on the highway, he heard us talking on the UHF and then put on a show.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...