Jump to content
SAU Community

Recommended Posts

To start with its a rb20det in my 32, sometimes after a bit of a hard run it'll do it, and other times just after it gets up to operating temp. if i try to accelrate it suddenly loses all power but no warning lights come on, and often stalls, then it'll run fine again and i can push as hard as i want....

I also have a light on at the moment now that looks like a cat conerter with heat coming of it, red light in the dash.....on idle it stays on and when reving it flashes....whats it trying to tell me???

Link to comment
https://www.sau.com.au/forums/topic/90996-sudden-loss-of-engine-power/
Share on other sites

The light will not come on if it is not hooked up. The light only comes on if it detects excessive heat which usually mean you have a rooted cat converter. Take your car to an exhaust shop and get them to remove it and inspect it. Most of the time you can just hit it from underneath and hear it rattle. If it rattles it's buggered. This can cause sudden loss of power including symptoms like the following:

Won't rev over a certain RPM

Uses excessive fuel

Engine cuts out

Exhaust smells like rotten eggs from the back

Can cause the turbo manifold to get red hot in some cases which can melt your impella (this is bad)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...