Jump to content
SAU Community

Recommended Posts

Cams, racefuel, nitrous and 600psi should do it.

Funny you say this. I spoke to another mate who has a dyno dynamics dyno, and he said you know how my dyno reads high, i said yeah, the barometer was out. He said everytime they checked the dyno for accurateness, they never checked the air temp. So everytime he ran the dyno it corrected itself to read in the snow, hence reading high numbers. Weird but true.

What about a GT-RS..same boost response as a 2530 with almost the same power potential as a 2540 (10kw less on the test car)

absolutely incorrect. the GTRS has nowhere near the same response as a gt2530, there are plenty of dyno charts that are floating around on the silvia forums to show that it is quite laggier then the 2530.

your statement is something everyone was running around claiming when the GTRS first came out, on sr's without cams the turbo wont even make as much power as a 2530 and will be laggier as well

for a 2L i recommend the 2530, for 2.5rb 2530 is good. you will only get 10-20rwkw more with the 2535 over the 2530 in top end, but you sacrifice down low, and for an already laggy rb20, i would rather response then 10rwkw extra up top

for a 2L i recommend the 2530, for 2.5rb 2530 is good. you will only get 10-20rwkw more with the 2535 over the 2530 in top end, but you sacrifice down low, and for an already laggy rb20, i would rather response then 10rwkw extra up top

Yes that sounds tru,i have a GT2535 and would like some more pulling power down low.It hits hard at 4000rpm and i love it but yer midrange is where id like more.

Yes that sounds tru,i have a GT2535 and would like some more pulling power down low.It hits hard at 4000rpm and i love it but yer midrange is where id like more.

Funny you say this, but i ran a guy (from the forums) who is only running 14psi, 2535, RB25 producing 244rwkw. We had roll on runs and everytime i beat him quite easily with my 2530,19psi setup. Mid range there was simply no contest even if he jumped me i would still come past.

absolutely incorrect. the GTRS has nowhere near the same response as a gt2530, there are plenty of dyno charts that are floating around on the silvia forums to show that it is quite laggier then the 2530.

your statement is something everyone was running around claiming when the GTRS first came out, on sr's without cams the turbo wont even make as much power as a 2530 and will be laggier as well

Ok I cant comment on the response, As it was compared to a 2540 not a 2530, (And it was alot more responsive than the 2540at 4000rpm it was up by 44%)but I have dyno graps that show the GTRS Makes only 10kw @ the wheels less than a 2540 wich would but it quite in front of the 2530 in the topend stakes. The only reason I suggested the GTRS is because this guy seemed interestend in having some more power up high than usual other wise I agree that the 2530 seems unbeatable for mid rage response.

Also in my first post I should have ball park boost response with the 2530 not the same that was me typing with out getting my meaning across clearly.

Is it fair to say that for this range of turbos the GTRS does the best job of melding decent response good mid range and good top end???

Edited by Bunta

Some of you should realise that there are 2 kinds of GT-RS's. The ones that go on the SR's are slightly smaller than the ones that go on the RB25's (and RB20 if someone were to do that).

A GT-RS on an RB20 would be way too laggy IMO.

the gtr twin gt-rs's are smaller than the rb25 gt-rs turbo much like the 2530's for the gtr in twin form are smaller than rb25 single hks2530, pretty mcuh as bob said, im not sure if the sr20 and twin gt-rs are same size though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...