Jump to content
SAU Community

Recommended Posts

Hey all,

Just got the GTR back from its 100,000km service. All went well except a few things need doing. I had so called K&N pod filters already on the car but the guys who serviced the car said they were not, but infact a K&N copy that cannot be cleaned or something. Anyways, what kind of pod filter should I fit to the GTR? Is it worth spending the extra money on a Japanese brand like HKS or apexi?

I went for a ride in a mates car and he has a HKS pod, and when changing gears it flutters. I WANT THIS SOUND. hehe :rolleyes:

thanks

Link to comment
https://www.sau.com.au/forums/topic/9173-which-pod-air-filter/
Share on other sites

Boosted_RB26,

Most of the filters that come with the foam type arrangement are shit, the particles end up working there way through the foam and hitting the turbo, this leaves the turbine with pits in it, which can lead to failure.

I have a Blitz SUS filter, they are excellent for airflow but they allow small dust particles in, so in dusty environments are not very good.

The best and cheapest option is to get a redine filter for $25, they give good filtration with no noticable power loss.

See'ya:burnout:

If you are into "name brands" then I read the Apexi power intake has a good filtration and good air flow combination compared to the other brands e.g. HKS, Blitz, K&N. Also, it is a dry type, meaning you don't need to re-oil it after cleaning (Autospeed).

Otherwise, just go for a cheap Hurricane air filter from Works. Does the job and for ard the same price as the redline filter you won't lose any sleep over it.

400HP, Damn that makes me a rice boy too. Always new that they filtered for shit, but though that they would make better HP, waste of $400, but it looks cool.

If your not after looks then go for the K&N or Hurricane filters, they are cheap provide good power and filter well.

See'ya:burnout:

ok thanks for your input people.

dumb question but are some filters louder than others? the reason i ask is that I went for a ride in an R31 with an RB20det the other day and I think it had a HKS filter. Anyway...it was much much louder than the ones I have now.

Im pretty sure its "works autos" old 31.

BoostedRB26,

In general the filters that don't filter as well will sound louder, so that is not a good thing to go for, mine is hell loud but will only filter things the size of a small child. Go for the hurricane's from Works, they do the job well, plus you'll save heaps of money for something else.

See'ya:burnout:

Boosted rb26 i dont think it is the filters that are lounder rather the setup on the car. When i had a pod filter on my car with the stock turbo setup the pod was very loud with all the woosh noises when you back off etc, now with the new big turbo and a different setup there is no noticable annoying noise coming from the filters, i think it is an rb20 thing with loud filters.

Actually I do think the noise is to do with the filter and maybe the engine. A friend with an RB20DET + HKS pod is VERY loud. Then again Franks' car with RB25DET NEO + Apexi is very loud too.

In general all aftermarket filters are loud. When looking at the link I sent before the best for performance and filtration were the K&N and the Apexi.

I have a Trust Airnx filter, and it is one of the foam type filters. It does a good job of keeping out pebbles and small stones, but i'm convinced that it lets anything smaller than that through. It is damn loud, wooshing and fuffling like a mad dog.

I had a K&N on my old car, and it was a much more pleasant sound - deep and tough sounding intake and probably filtered alot better... thinking of changing back to a K&N,

I read somewhere on the UK GTR forum that that test doesn't prove much as there are other variables that weren't taken into consideration. I'll try to find it.

Here it is

Link

It is a long thread, but the Scott guy seems to know.

Silver-Arrowz,

I agree that most tests don't prove much in terms of power, but I do agree that most of the expensive Japanese brands tend to be pretty poor at small particle filtration. I like the look of my Blitz SUS, but if your after value for money then some of the cheap brands will filter much better and not affect power for about $25.

So if your a rice-boy like me, then go the Jap brand, if your not and only concerned about power then go for the cheap pod.

See'ya:burnout:

Originally posted by 2fardown

Just get a K&N panel filter for your factory air box.  You won't be sucking in hot engine bay air and they filter a lot better.  Plus you can't get defected for it.

Absolutely.

For the 32R , the gains in a pod filter over a good K+N panel filter are zero unless you pushing big HP and there is some sort of cold air box .

Only thing pod filter gives is the blowoffs are heard which may or may not be a good thing.

Sounded good on mine for about... ohh... 5 minutes then started getting annoying.

Cheers

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...