Jump to content
SAU Community

Recommended Posts

NISSAN ECU INTERFACE CABLE, USB version with NISSAN DATASCAN 1-4 and DATALOG VIEWER Software. :rolleyes:

P1010003BLAZTFORAD-T.jpg

For those who aren't familiar with these, the cable allows you to connect your laptop to your cars ECU(computer)via the diagnostic/OBD1 port.(pictured here) littleOBD1-T.jpg

Simply plug in, no installing required.

Once the NISSAN DataScan 1-4 software is installed onto your laptop you are able to view/monitor most of your engine sensors real time, read fault codes and clear them, perform active tests such as power balance, make temporary adjustments to ignition timing, injector cycles,fuel pump and more, great diagnostic/ monitoring tool.

dviewerfirstscreensmall-T.jpgdviewergrpahscreensmall-T.jpg

You are also able to record logfiles of your car and with the new Datalog Viewer software, quickly transform this information to an easy to read colour coded graph.

laptopenginebayforumadd-T.jpg

The cable length, approx 1.8m, allows it to be used from the passenger seat or in the engine bay.

These cables are commercial quality and are used in some of our major workshops, they are not the home hobbiest version but a highly developed, micro enginered product. They DO NOT have the interface box along the cable.

Prices: Dedicated USB Cable alone : $120

Nissan DataScan +USB Cable: $155

Complete package of USB ECU Interface Cable, Nissan DataScan and Datalog Viewer software : $180

There is a RS232(serial) version of the cable also available, it is $20 less than the USB version.

P+H $10

Payment by bank transfer is preferred.

I am located Nth of Wollongong but will post worldwide.

Kind Regards,

Caz.....

I got your Pm Scooby and if anyone else would like to see the system in action I will be at Oran Park Saturday and Sunday and WSID this Sat night. Drop me a PM and Ill give you a contact number.

Kind Regards,

Caz... :(

quote=Scooby,27 Oct 2005, 05:35 PM]

pm sent

I have had lots of PM's requesting details of DataScan software so here is a list of what you can read/monitor/record with this product,

The Nissan Datascan 1.4 software details:

Currently available functions:

ECU Part Number

Data Display

Resizable window

Analogue and digital gauges

Peak value display

Parameters depending on ECU:

RPM

Air Flow

Air Flow Right Hand

Water Temperature (C or F)

Oxygen Sensor

Oxygen Sensor Right Hand

Speed (KPH or MPH)

Battery Voltage

Throttle Position Sensor

Fuel Temperature (C or F)

Intake Air Temperature (C or F)

Exhaust Gas Temperature

Injector Time

Ignition Timing

AAC Valve

Air Fuel Base

Air Fuel Base Right Hand

Air Fuel Base Self Learn

Air Fuel Base Self Learn Right Hand

Injector Time Right Hand

Duty Cycle

Duty Cycle RH

Registers:

Closed TPS

Power Steering

Air Conditioning Switch

Start Signal

Neutral

Air Conditioning Relay

Fuel Pump

Thermo Fan

VCT

Waste Gate Solenoid

Air/Fuel ration (lean/rich)

EGR Solenoid

3. Data Logging

Parameters and registers as per Data Display

4. Active Test

Engine Temperature

Timing

AAC Valve

Air/Fuel Base

VCT

Fuel Pump

Cylinder Off

Base Idle Adjustment

clear Self Learn

5. Self Diagnostics

Read Fault Codes

Reset Fault Codes

6. Speed Trial

Measured times (kph or mph):

0-60

0-100

0-120

40-120

7. Rom Data

Slow Data Download (1 byte at the time)

Fast Data Download (8 bytes at the time)

8. Address Watch

Any address in CPU memory.

As you can see it is quite extensive!!

Caz... :P

  • 4 weeks later...

I will be at ORAN PARK Raceway tomorrow morning for the trackday, so if anyone would like to see this system in action or just use it to run a check on their car, please drop me an email to sort times.

Kind Regards,

Caz.. :)

[email protected]

**I will also have the PDA diagnostic tuner 'EcuXtend' demo unit with me :)

Hi Dave, I intend to sell them for quite a while! They system will work on nearly all performance Nissans between 89 and 97; so yes it will definitely work with an R33 just as nicely as an R32. The software was actually written for an R33.

It plugs into your diagnostic port, which is usually near the drivers right foot.

Caz... ;)

Hi Paulie_Bro,

Both the softwares are registered and have 12mths support and UPGRADES emailed direct to the email address you supply me with.

Cheers,

Caz.. :D

are the sotware upgrade free once you've bought??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
×
×
  • Create New...