Jump to content
SAU Community

Recommended Posts

Most of us are runing pods and larger exhausts. While others are running even bigger turbos, larger fuel pumps and different ECU tunning. Even the odd gutted cat (pack the panadol for the headaches), its not worth it.

This can change the emissions from the factory limits which should meet the Australian standards.

Any one been pulled up for an emissions check in Qld?

Anyone else from other states been pulled over by their EPA/police/Department of transport?

Did you pass or fail, did you have to get a retest?

It would be a pain in the arse to have to change all your mods back to standard, espically turbo and ECU mods.

I think it is one of those things that is just around the corner, espically looking at the cahnges to some of the import regulations

Maybe dual fuel mapping is the key ...one for emissions/fuel, one for serious power...

Link to comment
https://www.sau.com.au/forums/topic/9377-random-emissions-testing-in-australia/
Share on other sites

Hmmm. I don't think its much of an issue.. they don't do much in victoria from what i've seen and heard around. It seems like its more of a somebody makes a complaint thing they check it here.

It looks like in NSW and QLD its used largely just an excuse to get some of the high spec ones off the road. Probably the same here but i've never seen them doing spot checks.

If anything, a skyline is going to have much less emissions than older Aussie produced cars as Japan has had pretty strict regs on it for a lot longer than us.

it is an issue Ihave heard of a number of people in vic who ahve been causght and have had to take their mods out to get the car to comply if you have an epa test in victoria nd they see an aftermarket ecu even if the car passes the test the car is failed cause to is not approved. that is why I'm an advocate of the power fc and remapping ecus.

becarful guys when you do your mods this could happen to you

meggala

Regulations for cars will get tighter ; the import regulations for better or worse are an example of this…. Owning a ‘legal’ modified car will take some careful planning with mods…. I could not get over the fact an air pod is a defect ….. How many imports do you see with the standard air box.

Queensland still only requires a roadworthy on a transfer of registration. A yearly road worthy will probably be brought in at some stage like NSW & VIC (?)

Mandatory emissions testing could become part of a yearly road worthy. Random emissions testing would be a great way of getting a modified car off the road.

Japan does have high emission standards but Australia may actually focus on different pollutants and different levels. I read about an import company have a lot problems complying some of the RX7 series 6, 7,8 because (I think) in standard form they did not meet Australian standards. (The current emissions testing is also biased towards piston engines)

Meggala

What’s the go with the power FC does it piggy back onto the standard ECU? Or is it a true plug in system…. I have always thought it was a plug in ….

The Power FC would be a great option but wouldn’t it fail, as it is not the standard ECU?

Sorry about the doom and gloom post, I am not that negative really! I just don’t want modified car/performance car owners to stick their heads in the sand and get caught out big time …. Kind of like the new import regs and its attitude to modified cars …..

We need to be on the ball and keep on eye on what our ‘best interests’ are according to the bureaucrats, politicians and the domestic car industry … and like some motorcyclists organise (ie the mandatory headlights on campaign) some action when its needed….

And maybe not pull off the most awesome drift up some crowded café street with a screamer pipe and no Cat …. I know it its tempting !

:burnout: :)

Mandatory emissions testing could become part of a yearly road worthy. Random emissions testing would be a great way of getting a modified car off the road.

Hmmm, they have talked about this for many years. Even Vicroads testing has shown that there is no evidence to suggest unroadworthy cars have any bearing on accidents. It was raised before parliament at one stage. I think it is one thing that will keep coming up. My thoughts are that it will not end up being brought in due the backlash by community groups and people on lower income - the cost of owning an older car will be pushed up by too much. Quite rightly I think so too - as I spent $2000 on my first car and i just could not have afforded to pay more while at uni, etc. The cost of enforcing and regulating this each year would also be quite a cost to the government too.

I'm more a fan of regular license testing to improve road safety but that is a different issue. I know each state is different. VIC requires a RWC to transfer a car, and yet 3rd party is not compulsory - but in SA requires neither. And NSW is different again. There never will be a unified approach to it all as it really is a state based issue.

I think it is only two aftermarket intake modifications allowed in VIC but i could be wrong. So a pod and intercooler pretty much puts you over. Then it comes down to what actually comes out the other end.

PowerFC is a full replacement ECU. Still its a 15 second job to check it assuming they know what to look for...they just have to see the logo on the box for a start. I assume he meant its more capable to tune to balance emissions better with all the aftermarket gear??

Everybody gets screwed over when they decide the road rules... there is very little consultation other than with industry "groups".

They want everybody to drive a Ford, Holden, or Mitsubishi and "standard" cars or "factory engineered" local or locally imported cars. There is a lot of pressure by these companies to encourage government to force people to buy newer cars for obvious reasons.

To me though .. make a decent aussie produced car for a decent price and i will buy it.. but i can't see that happening.

Not everybody wants to spend 30k+ on a new car every 3 years and go through that "cycle".

I agree .... Once we locally start producing/importing decent cars that are realistically priced ... we will buy them .... The new XR6 is probably getting a little closer but even if you had the money to buy one you would void the warranty once you start modifying properly.

Cars in the States and New Zealand even after the exchange rate tend to be cheaper! Imports do have different compliance standards in different countries .

But I hope that wouldn't stop the import car scene all together.

If the Power FC is a straight plug and play system, you could always plug the standard ECU back in and run standard boost if you are due for your emissions test. Don't know how a different turbo or fuel delivery system would affect the ECU…

The important question is down track can Skylines Australia and other related interests groups present a united front with the import/performance industry if more stringent legislation is placed on the modified car scene.

Legislation is there for a reason, I think its great if we can have better performing safe cars which may not only meet the emission standards but exceed them (some of the tuners out there are great but some are pretty average ie max power, crap mid range and fuel consumption and only mapping a couple of points) …

What frustrates me are seemingly pointless rules such as no pods because they may effect the emissions or it is not a standard ECU even though the emissions may past the standards …

  • 5 years later...

I got pulled over last night and the guys were too lazy or didnt know how to test me instead they defected me and asked me to complete an IM240 test for emissions.

Not sure if I will pass though, aftermarket FMIC, exhaust and POD?? Apparently its pretty common though particularly in rural areas. I got done in the Hunter Valley.

I got pulled over last night and the guys were too lazy or didnt know how to test me instead they defected me and asked me to complete an IM240 test for emissions.

Not sure if I will pass though, aftermarket FMIC, exhaust and POD?? Apparently its pretty common though particularly in rural areas. I got done in the Hunter Valley.

Its becoming increasingly common in Sydney as well.

Where abouts in the Hunter did u get done? What did u get defected for?

A guy on these forums GLTOY has passed numerous emissions tests on his RB25 >300RWKW with his own tune. I think he even tuned it on E85.Just search in the forced induction thread .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
    • That's some really horrible design with the way it's cut/shaped! Is there much damage to the box that failed in? IE, new fork and you can go again, or is it a total rebuild again? Id be trying to build that piece from scratch, and getting some reliefs added in the corner to hopefully stop breakage, and then swapping boxes ASAP, and then doing the same to the currently good working box. I'm assuming hard shifts have not been friendly to it!
×
×
  • Create New...