Jump to content
SAU Community

Recommended Posts

not a timing belt..... just having a stab in the dark here. or a really farked thrust bearing.

could be turbo even.. have ya chucked your head under th bonet to see if you can hear where it comes from

Thrust bearing?

It's an auto.

Does it make the sound while free revving (neutral) it or does it have to be under load? (driving down the street)

Link to comment
https://www.sau.com.au/forums/topic/94247-weird-noise/#findComment-1701612
Share on other sites

YEAH AT FIRST I THOUGHT IT WAS SOMETHIN LIKE THE CAT BUT ITS BEEN CHECKED BY 2 DIFFERENT MECHANICS AND THEY RECKON THE EXHAUST IS FINE MAYBE THERE MISSED SOMETHIN WEN THE CAR IS WARMED UP ITS FINE SO WOT EVA IT IS PROBABLY EXPANDS OR SOMETHIN IN THE HEAT TO STOP IT BUT ITS WEIRD HOW IT ONLY DOES IT UNDERLOAD NOT WEN JUST FREE REVING IT

Link to comment
https://www.sau.com.au/forums/topic/94247-weird-noise/#findComment-1703600
Share on other sites

Is there any way you could be a little more specific on the noise. 90% of the time when I am trying to sort out a problem for a customer they are saying 'bang' when really it's a 'click' or 'rattle' when it's a 'squeak'. Can you describe it any better than fluttering and have you gone for a drive with someone to try and locate the position of the noise a little better.

When they checked the exhaust, did they check your manifold gasket (often missed on an exhaust inspection).

Easiest way to test it is get a rag big enough to fold up and put over your exhaust tip. Then get someone to block the exhaust in 2 second intervals while you stay up the front and listen for any leaks. You will hear it start to hiss when your friend blocks the end as the pressure builds up quite quickly. This noise may be present while the engine is cold because everything hasn't expanded yet. Once the heat get's through it and the manifold expands a little, it will seal off the leak.

Go check it out - easy to do at home and will rule out the exhaust.

If it's the cat, all you gotta do is get half under the car and give it a bash, if it rattles - it's rooted. Only a rattling cat will make noises while driving.

Link to comment
https://www.sau.com.au/forums/topic/94247-weird-noise/#findComment-1703882
Share on other sites

ILL GIVE THAT A TRY THE ACTUAL NOISE SOUNDS AS IFS ITS COMIN FROM THE MUFFLER BUT I HAD THAT CHANGED AND DIDNT STOP IT ITS KIND OF A RATTLE FLUTTER IF THAT MAKES SENSE ITS WEIRD HOW IT ONLY DOES IT AT A CERTAIN REV PROB BOUT 2800 AND PROB STOPS WEN I GO PAST 2900-3000

Link to comment
https://www.sau.com.au/forums/topic/94247-weird-noise/#findComment-1706140
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...