Jump to content
SAU Community

Hks Hiperd Adjustable Coilovers R34 Gt-t

jmac
 Share

Recommended Posts

jmac Rising Star

jmac

Posted
Posted

Item: HKS HiperD adjustable coilovers, suit R34 GT-T

Location: Brisbane (Southside)

Item Condition: Used, good condition, no leaks, no problems

Reason for Selling: Got a Bilstein/Whiteline kit installed

Price and Payment Conditions: $1000 plus delivery if interstate.

Extra Info: High quality silver/purple units, suit road use if you like a firm ride and would be brilliant on a racetrack. Have just recently come off my R34 GT-T and have done somewhere between 20,000 and 50,000 kms. Fully adjustable for height and 12-position adjustment for rebound damping, front and rear. I can confirm from experience that this adjustment makes a significant difference to the feel of the car.

Rear allen-key HKS adjusters included, fronts adjust via a normal hex allen key. To be sold as-is. I have been offered $1000 for these by Zoom in Brisbane but would prefer they went to a nice home via SAU.

Contact Details: John, Ph 0407 171 337, would prefer a PM first.

post-17890-1131548645.jpg

  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...