Jump to content
SAU Community

Recommended Posts

I have just bought a 95 r33 gtr. It has just posted 310 kw @ the wheels. It has 2 steel plated ball bearing turbo's running 20 psi.

Upgrded intercooler and piping.

Adjustable hks cam gears

3.5 inch Exhaust going straight through cat.

twin sports air filters

Electronic boost controller

Aftermarket E.C.U

air flow meter

hks sports cluth and fly wheel

injectors and fuel pump.

Sports suspenion and 19x10 mags.

I would expect on a cold night with octane booster about 325-330 at the wheels.

What 0-100 km times and 1/4 times would this be possible of. I would never take it to the drags but just want to know for my own interest. I was told it was possible for high 10's and just under 4 sec 0-100. Does this sound about right?

I know of a R33 GTR with 285kw at the wheels that has done a 11.8 @ 118MPH. So id guess you would be looking at a 11.2-11.6 pass at about 120-124mph. You would need to post something like a 1.6-1.7sec 60foot time though.

0-100KM/PH would be in the 3.5-4.0sec area, depending on launch.

About the lowest power for a 10sec pass ive seen, was a stripped out R32 GTR with a dog box and HKS-2540'S that ran a high 10sec pass with 358awkw... it needed a 1.51sec 60foot to do it though!!!

If you've just got steel wheeled turbo's, and allready need 20psi to post 310kw at the wheels, then without a rebuild of the engine, or c16/avgas, you wont be able to run much more boost than what you are allready. Sounds like you have N1 turbo's fitted. No GTR with N1's is gonna have enough power to run a 10sec pass IMO.

Edited by mazgtr

[Thanks guys for all your responses. I would be more than happy with 11.2-11.6 1/4 mile time. I don't see myself taking it to the track any time soon though. I just wanted it set up for maximum accelaration and quickest 0-100 times just for every day driving to have the huge power when I want it off the mark to say goodbye at the lights etc. If I can run close to 3.5 0-100 I am happy with the results.

I know it is set up for turbo's to kick is asap which is about 2900 rpm and has already 200+ @wheels by 4000 rpm and just keeps going.

All up I have spent about $8500 for the mods, since it already had cat back exhaust, intercooler upgrade, suspenion and mags when I bought it. It's not a V-SPEC model done under 35,000kms. Is $45,000 on road a decent price for this car with such low km's and such mods. Including full black re-spray and sterio system and new clutch plates on top of the 8500.

Anyway I still haven't even driven it yet or being in a gtr let alone a modified one. I hope its as good as everyone says and the good thing is my misses can drive a manual. What a shame.

Just one more question for you guys with GTR'S dyno is the power at all 4 wheels or does it revert to only rear wheels on dyno?

Edited by gdogzgtr
[Thanks guys for all your responses. I would be more than happy with 11.2-11.6 1/4 mile time. I don't see myself taking it to the track any time soon though. I just wanted it set up for maximum accelaration and quickest 0-100 times just for every day driving to have the huge power when I want it off the mark to say goodbye at the lights etc. If I can run close to 3.5 0-100 I am happy with the results.

I know it is set up for turbo's to kick is asap which is about 2900 rpm and has already 200+ @wheels by 4000 rpm and just keeps going.

All up I have spent about $8500 for the mods, since it already had cat back exhaust, intercooler upgrade, suspenion and mags when I bought it. It's not a V-SPEC model done under 35,000kms. Is $45,000 on road a decent price for this car with such low km's and such mods. Including full black re-spray and sterio system and new clutch plates on top of the 8500.

Anyway I still haven't even driven it yet or being in a gtr let alone a modified one. I hope its as good as everyone says and the good thing is my misses can drive a manual. What a shame.

Just one more question for you guys with GTR'S dyno is the power at all 4 wheels or does it revert to only rear wheels on dyno?

awkw.

So all wheels.

Haha I hope you have experience with modified cars, coz if you haven't this thing is going to be lethal in your hands! :)

Take it easy for a while until you get used to your machine.

[i've only had a TT Soarer and my misses has a TT supra which has 220 @ rear wheels. I will take it easy for a while for sure. One thing I have over most of you guys thiugh is I have done a 2 week extreme drivers course due to my job as a cop. Please don't hate me now I don't pick on Jap imports just when people have BOV that can be heard miles away or drive like a dick head we pull them over. Well that's in victoria I can't speak for other states and I can't speak for Traffic units either. Generally the most we can do is EPA the cars due to open air filters and BOV otherwise you are left pretty much alone.

Thanks again for your response. :)

Also in repsonse to earlier saying 20 kw gain form octane boost. It's not just the booster a dyno is the equilivent as a 35 deg day as lack of cool air as only fan blowing. If your doing 80km/h plus and it's a cold night you would get that improved 5% gain.

Edited by gdogzgtr

You're a cop hey?

The import drivers worst enemy....joke, joke.

It's cool how u don't pull imports over for no reason, which is what a lot fo cops do.

Also find it interesting, that your car is defectable! LoL.

Nah that's cool, I hope you stay on the forums and contribute to the Victoria section about laws/defects n stuff, coz it comes up a lot.....e.g "Are my pedals defectable, Are abc, or xyz allowed etc etc."

Always good to hear inside knowledge.

No worries. Anyone with questions on what's legal or defecable in victoria I will find out. There is no point spending good money to do up cars just to find out that it's illegal and you have to remove it or your car is unroadworthy.

The most obvious things are loud exhausts, open air filters in engine bay and BOV which are all EPA issues.

Edited by gdogzgtr

I reckon you should give it a run at the drags and find out!

If you are too timid to drive it yourself (don't feel bad - that is a serious machine you have on your hands!) I'm sure there are plenty of friendly SAU members that would be willing to donate their time and run your car into the 11's for you :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...