Jump to content
SAU Community

Recommended Posts

I have sold my standard GTR fuel pump from my R32 GTR and bought a factory R32 GTSt fuel pump, and an aeromotive A1000 external pump ( this one ). I need to shift my car to the other side of town, but i cant get a surge tank for 2-3 weeks. Will my car run on just the GTSt fuel pump? Or will it run with low fuel pressure and cause my car to run lean? And an external fuel pump must have a surge tank/swirl pot, correct?

Thanks guys!!

Adam.

Link to comment
https://www.sau.com.au/forums/topic/94510-gtst-fuel-pump-in-gtr/
Share on other sites

I do believe it will run fine, provided you arent maxing out the gts-t pump. If you could keep it off boost ~4-5% injector duty cycle, then i dont think you would have any problems

Ah thats awesome, thats what i thought too, just needed another opinion! thanks!

Unless you plan to do a lot of circuit work / drag racing I see no need for a surge tank.

You can even get away without having one as long as you keep your fuel tank full.

I doubt you'll have any fuelling problems - it anything it will probably run rich - I know of guys that run a standard r31 non turbo pump in tank and use a bosch external in high hosepower applications. Your external will give you plenty of fuel pressure.

These are the specs of your pump below, now why are you buying one of these at $290 US when you can buy a bosh or walbro pump that will give you close to the same sort of power I think the walbro in tank supports up to around 450kw (could be wrong on that figure) sorry to be so negative but it just seems like there is a lot of better options locally and for less money.

Specs:-

For carbureted powerplants making up to 1200 HP and fuel injected engines:

up to 700 HP - forced air induction

up to 1000 HP - naturally aspirated

up to 1200 HP - carbureted systems at the track, on the street, and in the water.

  • 3 weeks later...

Yea ill probably just put it in line without a fuel cell for the mean time.

havent got a fuel cell yet matt, where should i get one from? maybe we should get someone to make up 2 for us (1 each!) :)

Yea if i were buying a fuel pump id buy a walbro or bosch, but i got this real cheap, so im going tyo use it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...