Announcements
-
Similar Content
-
-
Latest Posts
-
Is correct. Manifold vacuum at idle is about the difference. -
It's the front axle on a Stagea. How hard can it be worked?
-
By Chris_Guthrie · Posted
Fuel pressure increases to about 48 when blipping the throttle while running -
By Chris_Guthrie · Posted
Latest update, reinstalled the evap canister. No change. Disconnected the fpr vacuum hose, no change. Hooked up the fuel pressure tester. 42psi when primed, consistent with what I've been seeing online. When running, drops to 34psi. Ideas on this? Also, when I did my fuel pump rewire, I tested hot before tapping. I attempted at first to just unplug my relay to relieve fuel pressure and the pump still primed and ran. Thought that was strange. Unplugged the connector in the trunk by the fuel hat and was able to relieve fuel pressure that way. Starting to wonder if I jacked something up with my wiring because shouldn't be priming without the relay hooked up. -
By Dose Pipe Sutututu · Posted
Would only affect the low end, not the outright power produced. Also 180kW is about right for a stock turbo, you could push a bit more boost and make 190~200kW then hours later (maybe minutes) be ready to buy a new turbo lol.
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now