Jump to content
SAU Community

Willowbank 16th And Streetcar Shootout 19th?


Recommended Posts

Hey all,

Taking blacky out on wed night for some final shakedown passes before its first even at streetcar shootout on saturday....

Neone else going out...

Gearbox should be sorted, so fingers crossed it may carck an 11.

See yous there.

Hi Mate

yeah

Im there on weds getting some practise. also going for some low 11s.

i have some dead street rubber tho, so we'll see. im sure no traction will be an issue for me.

I presume you are in the All in 4,6,8 rotary DYO Street Class at the StreetCar Shootout?

hopefully we should line up against eachother on weds and have a larf.

thanks

Mick

Haven't been to one for  a while might give it a try I am still a 1/4 mile virgin

Well then, no better person than Mick to give you a raping for your first time.

Just remember, dump the clutch on the last orange light....that's the one just before the green. This should give you a good reaction time.

And when you think you have crossed the finish, keep going for a bit....the track is a lot longer than you think and when you think you are finished you usually still have 100m to go.

i will probably be heading out

as i just got my power fc in and put the boost up to 10psi

im guessing its going to be fairly busy, considering the shootout on saturday. last quarter run was 14.3, skidded all first

i want to let the tyres down abit but i dont really want to drive on 25 psi to the next petrol station. As i just got the tyres last week

it might not matter but oh well, i'll just have to try and control not skiddin as much at the start.

Good to see a couple of skylines headin out though, last ones i been too there has been a shitload of commodores and fords.

Ya kinda guess it though being in ipswich.

Anyway see yas there, hope yas pull some good times.

i will probably be heading out

as i just got my power fc in and put the boost up to 10psi

im guessing its going to be fairly busy, considering the shootout on saturday.  last quarter run was 14.3, skidded all first

i want to let the tyres down abit but i dont really want to drive on 25 psi to the next petrol station. As i just got the tyres last week

it might not matter but oh well, i'll just have to try and control not skiddin as much at the start.

Good to see a couple of skylines headin out though, last ones i been too there has been a shitload of commodores and fords.

Ya kinda guess it though being in ipswich.

Anyway see yas there, hope yas pull some good times.

hehe ive driven to the closest petrol station on 14psi before.... 25 wont be a problem....

hay jhon what to meet up and drive down

Today or saturday??

I still have some last minute things to finish off on the car, then i have to throw it on the trailer so im not sure what time ill be leaving this arvo.

Ill probably be leaving around 6-630ish on saturday morning.

i might have to look into gettin one of those compressors

could come pretty handy later on

I left my tyres alone tonight

ended up doing a 14.089

reaction .654

mph 101.69

60ft time was 2.246

f**ked the start abit didnt have much revs .

and also let third rev out a little too long.

thought it was alright though.

getting closer to getting into the 13's

hmmmm well i had an interesting night.... didnt get out till like 7:15...

Did a half powerr lass to make sure it was gonna change gears... next pass i stalled it up and it skipped foward through the beams on the front runners.... Never driven with them before... Then it managed a reasonably clean 12.2@112mph... gearbox is shifting unreal.... really happy with that.... just got look at being super consistant now.

nice well done.

i didnt have much chance to come say hi - i had sme small probs etc.

i saw a little burnout from you etc.

i ran a 11.91 @ 118.89mph lots of traction loss etc wasnt a full flat stick run.

but on other runs was having probs cog swapping...

need to change gearbox oil today/tomorow for sat.

got stuck in 2nd gear! :D

mick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...